|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-07-2025, 11:45 AM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2025
Posts: 6
|
Cushman Hauler 1000 48V
I have a 2013 Cushman Hauler 1000 48v. The key switch was removed and replaced but is wired wrong. Is there a schematic on the key switch or anyone know where these wires go. Thanks
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-07-2025, 02:42 PM
|
#2 |
|
Gone Wild
 Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,696
|
Re: Cushman Hauler 1000 48V
Look at the PDS drawing
|
|
|
|
05-08-2025, 08:56 PM
|
#3 |
|
Not Yet Wild
Join Date: Apr 2025
Posts: 6
|
Re: Cushman Hauler 1000 48V
I put the wires on according to the diagram with the direction selector and worked. But now I also getting a code on my SepEx box 2 flashes then 4 flashes. Cart moves slow. The SepEx box is new so not sure if it’s the box or somthing else.
|
|
|
|
|
05-08-2025, 09:08 PM
|
#4 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,696
|
Re: Cushman Hauler 1000 48V
What model controller do you have?
|
|
|
|
|
05-08-2025, 09:28 PM
|
#5 |
|
Not Yet Wild
Join Date: Apr 2025
Posts: 6
|
Re: Cushman Hauler 1000 48V
It’s a 1268-5411
|
|
|
|
|
05-09-2025, 11:06 AM
|
#6 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,696
|
Re: Cushman Hauler 1000 48V
68 or 64? Different codes?
|
|
|
|
|
05-09-2025, 04:20 PM
|
#7 |
|
Not Yet Wild
Join Date: Apr 2025
Posts: 6
|
Re: Cushman Hauler 1000 48V
It’s a 1268
|
|
|
|
|
05-09-2025, 09:27 PM
|
#8 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,696
|
Re: Cushman Hauler 1000 48V
Okay well a 2-4 on a 1268 is an open coil on the solenoid or bad controller. Fixing the key switch might clear that.
|
|
|
|
|
Today, 08:59 PM
|
#9 |
|
Not Yet Wild
Join Date: Apr 2025
Posts: 6
|
Re: Cushman Hauler 1000 48V
Ok so I wired the key switch according to the schematic above. Had the 2-4 error. Bought a new solenoid and put it on today. Still have the 2-4 error code. Here is the picture of the key switch wired.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Cushman Hauler 1000 questions | Electric EZGO | |||
| 1268 Cushman Hauler 1000 buzzer/controller problem | Electric EZGO | |||
| Hauler 1000 stock 12v reducer | Electric EZGO | |||
Linear Mode
