CC precedent anti-tamper fault

[georgia088]

Anyone ran in to an anti-tamper fault on a cc precedent with 1510 controller? What causes this?

Thanks!

[georgia088]

I changed out the speed sensor and the magnet, but I still get the error. When I originally connected the handset to the controller, the speed setting was set to 4 with a yellow warning looking sign. I changed the setting back to three and two, but it still goes to limp mode. Any ideas?

[InvalidUsername]

There's no such thing as an anti-tamper fault on a 1510. That's would be a 1515 controller (white or gray).

[TheCartBoy]

Turn off the visage gps option

[georgia088]

Invalid, You’re right. It was a 1515. Sorry. I figured it out I think. Someone had changed the control mode to setting 1. I changed back to 0 and it quit giving me the error. I’ve never really understood the control mode. I think it has something to do with how the controller handles output from the input signal from the throttle, but I don’t understand exactly how it works.

What is the visage setting? I read about it while I was researching this problem, but I didn’t see anything when looking at the handheld that used this word.

Never mind about what is visage. Google was my friend. (https://bspgc.com/fleet-vehicles/visage) I’ve seen these but didn’t know what it was called. Does control mode toggle this on?

Thanks fellas!

[InvalidUsername]

Control mode and anti-tamper have to be set to zero. They both part of the Visage GPS.