04-07-2017, 04:13 PM | #1 |
Gone Wild
Join Date: Jan 2016
Location: Butler, PA
Posts: 353
|
VC460 Guages
Just got my VC 460 in and while I have everything apart was thinking what guages are necessary (or at least beneficial. I have a tach waiting and a volt meter. Was thinking oil pressure could be nice to have. Anyone else install any guages in a 460, or similar? Thanks
Dan Sent from my LGLS992 using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-07-2017, 05:12 PM | #2 |
Crazy Ole Man
Join Date: Jan 2016
Location: Owego NY
Posts: 2,758
|
Re: VC460 Guages
The VRX 460 doesn't have an oil pump -- so no oil pressure. A volt meter is nice and a cylinder head temp gauge are good. If you have the right gas tank -- a fuel gauge. A compass so you don't get lost in the woods.
|
04-07-2017, 05:18 PM | #3 |
Gone Wild
Join Date: Jan 2016
Location: Butler, PA
Posts: 353
|
Re: VC460 Guages
Hah wow shows my experience with the 460! Thanks. I may add a fuel guages later, but for right now I am ok lifting the seat to look at the fill cap guage.
Sent from my LGLS992 using Tapatalk |
04-07-2017, 05:21 PM | #4 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: VC460 Guages
The hour meter on the cheapo tach is a really nice feature. I have the Equus for real time RPMS and the cheapo tach for the engine hours.
|
04-07-2017, 05:23 PM | #5 |
Gone Wild
Join Date: Jan 2016
Location: Butler, PA
Posts: 353
|
Re: VC460 Guages
OHH good call Ray! I have the Equus but engine hours would be nice. On a side note, how many hours do you put on between oil changes on it?
Sent from my LGLS992 using Tapatalk |
04-07-2017, 05:32 PM | #6 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,314
|
Re: VC460 Guages
Volts, Oil Pressure and Cylinder Head Temp-- |
04-07-2017, 05:53 PM | #7 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: VC460 Guages
On a fresh VC 460 I went with 45 minutes,2 hours ,10 hours and finally 25 hours.I also made up my magnetic dip stick which I clean off almost daily with my relocated S/G. One other gauge I use is the el cheapo bike speedometer which is also neat to have.
|
04-07-2017, 07:20 PM | #8 | |
Gone Wild
Join Date: Jan 2016
Location: Butler, PA
Posts: 353
|
Re: VC460 Guages
Quote:
Sent from my LGLS992 using Tapatalk |
|
04-07-2017, 07:34 PM | #9 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: VC460 Guages
S/G Stands for starter/generator.
|
04-08-2017, 06:23 AM | #10 |
Gone Wild
Join Date: Jan 2016
Location: Butler, PA
Posts: 353
|
Re: VC460 Guages
Got it. I just spent a while getting mine mounted bc the included bracket/hardware was wrong. I ordered the hour meter and bike speedo last night per your recommendation.
Now I just have to find a quieter exhaust. They say the walker is supposed to be very quiet, but mine certainly is not. I cannot take it to my campground like this. Sent from my LGLS992 using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
Vc460 won't run without the choke HELP!! | Clone Engine Swaps | |||
VC460 Got here today! | Clone Engine Swaps | |||
Dash mount guages | Electric Club Car |