|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-04-2017, 09:48 AM | #1 |
Gone Wild
Join Date: Apr 2010
Location: Stringer, MS
Posts: 200
|
1995 Medalist engages but will not move
36 volt Series At times cart will engage when pedal is pushed but will not move. Sometimes it will move. Happens both forward and reverse. By engaging I mean it will try to move but does not. When she runs she runs great, problem is happening more and more. Micro switch, solenoid or? I did replace controller. Could it be the box under the accelerator?
Batteries are new fully charged, cart sat for years unused, it's my my rebuild project. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-04-2017, 01:53 PM | #2 |
Gone Wild
Join Date: Apr 2010
Location: Stringer, MS
Posts: 200
|
Re: 1995 Medalist engages but will not move
forgot, parking brake is not set.
|
01-04-2017, 03:32 PM | #3 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 1995 Medalist engages but will not move
When you press the pedal, does the solenoid click?
If it does, the problem is in the high current circuit and the most likely suspect is the F/R switch. |
01-04-2017, 05:10 PM | #4 |
EZ come EZ go
Join Date: Apr 2012
Location: Parkland FL
Posts: 1,412
|
Re: 1995 Medalist engages but will not move
what controller did you put in when replaced?
|
01-04-2017, 05:46 PM | #5 |
Gone Wild
Join Date: Apr 2010
Location: Stringer, MS
Posts: 200
|
Re: 1995 Medalist engages but will not move
High Current circuit in the f/r switch. What is the coil for that is located on the top of f/r switch? Also put old controller back on cart since changing it out did not work, was same controller model.
|
01-04-2017, 05:47 PM | #6 |
Gone Wild
Join Date: Apr 2010
Location: Stringer, MS
Posts: 200
|
Re: 1995 Medalist engages but will not move
solenoid does click
|
01-04-2017, 07:32 PM | #7 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 1995 Medalist engages but will not move
Check for power from solenoid to controller when in failure mode. Just because it clicks, doesn't mean it works, might not be contacting. If that's good, then likely bad f&r.
|
01-05-2017, 10:00 AM | #8 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 1995 Medalist engages but will not move
Quote:
Just to verify, does the solenoid click when cart is misbehaving? |
|
01-06-2017, 08:48 AM | #9 |
Gone Wild
Join Date: Apr 2010
Location: Stringer, MS
Posts: 200
|
Re: 1995 Medalist engages but will not move
Dumb me, the round deal on top of the f/r switch is the buzzer, As far as the no go problem, I should have known. Cart sat for about 7 years, found spider residue in the micro switch mounted on the f/r switch. Cleaned out the spider webs, she now runs fine. Thanks guys for all your help!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1995 EZGO Medalist will not move under load | Electric EZGO | |||
1995 Medalist parts | Electric EZGO | |||
1995 E-Z-GO Medalist | Electric EZGO | |||
My 1995 Medalist DCS | Electric EZGO | |||
1995 DCS medalist won't go | Electric EZGO |