|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-29-2016, 05:32 PM | #1 |
Getting Wild
Join Date: Feb 2011
Posts: 131
|
Replaced Front End Bushings 2006 Precedent. Trouble Getting Everything Back In Place.
Is there something I need to know to get everything lined up so bolts will screw in. Seems everything is too tight so there is no play to get bolts through frame and sleeve and get the bolts to start threading. Any suggestions?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-29-2016, 06:53 PM | #2 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Replaced Front End Bushings 2006 Precedent. Trouble Getting Everything Back In Pl
They just fit tight. WD-40 and a Hammer are what I recommend.
|
08-29-2016, 07:26 PM | #3 |
Gone Wild
Join Date: Jun 2014
Location: Concord, NC
Posts: 354
|
Re: Replaced Front End Bushings 2006 Precedent. Trouble Getting Everything Back In Pl
WD40 or silicone spray have worked for me.
|
08-30-2016, 02:20 PM | #4 |
Getting Wild
Join Date: Feb 2011
Posts: 131
|
Re: Replaced Front End Bushings 2006 Precedent. Trouble Getting Everything Back In Pl
That was it guys, Thanks. Silicone and a hammer was needed when I was trying to finesse it in.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
I replaced the shaft on my F/R switch, now I'm having trouble getting it lined up. | Gas Club Car | |||
Replaced Battery Rack - Putting it Back Together | Electric EZGO | |||
where is the best place to check about replacing my seat and back rest on my 96 DCS?? | Electric EZGO | |||
Cheap place for bearings and bushings? | Electric EZGO | |||
anybody ever replaced a back up buzzer | Electric Club Car |