|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-15-2012, 10:54 AM | #21 |
Gone Wild
Join Date: Jan 2012
Location: Kansas City, Mo
Posts: 544
|
Re: Installing HEI Ignition on 3PG Carts
Thanks Dave for the lesson I'm New to the cart world but with all the lessons you guys give it helps us new guys figure out things alot fast.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-15-2012, 05:03 PM | #22 |
Gone Wild
Join Date: Mar 2009
Location: Raleigh NC & Bracey VA
Posts: 156
|
Re: Installing HEI Ignition on 3PG Carts
Comment on the 2pg / 3pg and a little history. The 2PG was built by Robin. EZ-GO decided that they could do better and designed the 3PG. It had more power and the engine placement was necessary because of the new rear ends that were available. Finally EX-GO gave up on the 2-cycle concept and change to the 4 stroke engine that was compatible with the rear ends they were using. Of note, During this time frame, the rear ends used by Yamaha and EZ-GO were self adjusting. Took Club Car forever to catch on that self adjusting brakes were a good idea. Why they took so long is still a mystery.
|
02-09-2012, 05:21 PM | #23 |
Not Yet Wild
Join Date: Nov 2011
Posts: 1
|
Re: Installing HEI Ignition on 3PG Carts
Geat write up and cured my irratic spark like a charm!!!!!
|
02-10-2012, 09:47 AM | #24 |
Not Yet Wild
Join Date: Nov 2011
Location: NY State
Posts: 59
|
Re: Installing HEI Ignition on 3PG Carts
Thank you!! Glad it worked out for you. I think half the improvement is the new connector end on the plug wire. Electrically, it's just a far better solution than the old-school screw post inside the stock coil.
|
03-16-2012, 03:32 PM | #25 |
Getting Wild
Join Date: Feb 2011
Location: Boonville Indiana
Posts: 109
|
Re: Installing HEI Ignition on 3PG Carts
Ron Man, I just put the HEI on my 87 marathon, runs great Thanks a Bunch!!! Got the coil & ignitor from Auto Zone for $46.00, man i just can't get over it , that son of a gun runs better than it ever has.
|
03-17-2012, 10:02 PM | #26 |
Not Yet Wild
Join Date: Nov 2011
Location: NY State
Posts: 59
|
Re: Installing HEI Ignition on 3PG Carts
Yes siree!!! They sure do run great with HEI!! Glad it worked out for you too!!
|
03-24-2012, 01:41 PM | #27 |
Getting Wild
Join Date: Sep 2010
Location: NE KS
Posts: 111
|
Re: Installing HEI Ignition on 3PG Carts
Here is another way to install the coil that would survive the rough life my carts enjoy. It is on a 89 3PG Truckster. BTW the black wire on the electrical diagram does go to the ground screw on the ignition module - that is not clearly described previously.
|
03-25-2012, 10:21 AM | #28 |
Not Yet Wild
Join Date: Nov 2011
Location: NY State
Posts: 59
|
Re: Installing HEI Ignition on 3PG Carts
Nice!! Not sure my utility body would clear the coil in that location though.
|
03-25-2012, 04:59 PM | #29 |
Getting Wild
Join Date: Sep 2010
Location: NE KS
Posts: 111
|
Re: Installing HEI Ignition on 3PG Carts
|
04-12-2012, 11:45 PM | #30 |
Not Yet Wild
Join Date: Feb 2011
Location: Calbayog City Samar,PH
Posts: 15
|
Re: Installing HEI Ignition on 3PG Carts
Changed over the igniter as above but getting low to intermittement spark, any non factory ideas for igniter assy to control the spark that i might be able to locate in the provinces of Philippines, ie: mostly salvage parts from toyota cars available.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Top Notch Carts, Edinburgh, Indiana. Carts I've built. | Members Rides | |||
Yamaha G9-Ignition Coil & Ignition Switch-Help | Gas Yamaha | |||
Installing a DCX 400 | Electric EZGO | |||
Carts, carts, carts!!!-'01 EZ GO-$1300.00!!?? | Golf Carts and Parts | |||
Installing Light Kit G16 | Gas Yamaha |