|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
03-17-2010, 07:24 PM
|
#1 |
|
Gone Wild
Join Date: Sep 2008
Location: Godfrey, Illinois
Posts: 313
|
Arcing from #6 neg terminal?
I just replaced the batts and cables on my 02 48 volt club car and now when i press the pedal it sparks from the #6 neg terminal? I know they are hooked up right so why is it doing this? also it acts like its not taking a charge. thanks
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-17-2010, 08:13 PM
|
#2 |
|
Gone Wild
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
|
Re: Arcing from #6 neg terminal?
Sparks generally indicate a bad connection. You may have a bad cable. It is always a good idea to change your cables when you change your batteries. I would also check again to see for sure that all the batteries are neg to pos all the way through the set. How is it acting like it won't take a charge?
|
|
|
|
|
03-17-2010, 09:05 PM
|
#3 |
|
Gone Wild
Join Date: Sep 2008
Location: Godfrey, Illinois
Posts: 313
|
Re: Arcing from #6 neg terminal?
I did replace the cables. charged it and it ran down the drive way then quit? now the charger wont come on.
|
|
|
|
|
03-17-2010, 09:45 PM
|
#4 | |
|
Gone Wild
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
|
Re: Arcing from #6 neg terminal?
Quote:
I would double check the battery wiring for proper connections. It just sounds like a battery is in backwards. |
|
|
|
|
|
03-23-2010, 01:49 PM
|
#5 |
|
Not Yet Wild
Join Date: Nov 2007
Location: South East Michigan
Posts: 1
|
Re: Arcing from #6 neg terminal?
Check small gage red wire that is connected to last battery to charger plug.
|
|
|
|
|
03-23-2010, 02:45 PM
|
#6 |
|
Gone Wild
 Join Date: Jan 2010
Location: Brevard County, Florida
Posts: 280
|
Re: Arcing from #6 neg terminal?
From what i can gather the OBC/charger look for a minimum of 40 volts to come on
|
|
|
|
|
03-23-2010, 04:36 PM
|
#7 |
|
Gone Wild
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
|
Re: Arcing from #6 neg terminal?
If you have sparks coming from #6 battery terminal there is an improper connection of some kind.
|
|
|
|
|
03-23-2010, 04:59 PM
|
#8 |
|
Gone Wild
Join Date: Jan 2010
Location: Brevard County, Florida
Posts: 280
|
Re: Arcing from #6 neg terminal?
Look for loose cables in lugs, frayed wires, wire strands sticking out of lug, darkening around lugs
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| '95 fleet cart arcing at batt after wire motor swap | Electric EZGO | |||
| A2 Terminal | Electric EZGO | |||
| arcing | Electric EZGO | |||
| battery terminal | Electric Club Car | |||
| Control board arcing on '87 | Electric EZGO | |||
Linear Mode
