Driven Clutch Bolt Removal

Fairtax4me · 12-04-2022, 11:31 PM

Quote:

Originally Posted by trig123

3/4th of a 100 to be exact plus a few months

but I am still here which is always good

Hey man it’s all good, nobody knows metric here anyway!

BrucecurB · 12-06-2022, 09:57 AM

Good Grief! I really got you guys on a roll... Sound like my 'dishonarable' buddies and me kicking one another around! Thanks for the smiles...

I've used that Belt Install method on my EZ-Go 2pg and it was a breeze. I was attempting that with the C-Car and it was NOT cooperating. That's when I discovered the missing Button, and the Clutch being basically 'stuck' in the Over Extended position. Most likely after I either get this one freed up or replaced, the Belt will 'roll on' as mentioned. However, if not.... "I'll be Baaaach!"

Much Thanks!
Bruce

Fairtax4me · 12-06-2022, 11:36 AM

The clutches in these tend to be a little tight, and rolling the belt on is a little more difficult than some other carts, but it is doable. To remove it you kinda have to pull up on the belt pretty hard and roll the clutch over about a half turn while pulling up on the belt, then it gives enough slack to pull the belt over the side and roll it back the other way so it will pop off.
Still Way easier than changing a side by side belt!

BrucecurB · 12-06-2022, 11:21 PM

Thanks again folks...

Now off I go to the EZGo section with a 2PG Carb adjustment question!

Bruce

12-06-2022, 09:57 AM	#22
BrucecurB Not Yet Wild Join Date: Oct 2021 Posts: 50	Re: Driven Clutch Bolt Removal Good Grief! I really got you guys on a roll... Sound like my 'dishonarable' buddies and me kicking one another around! Thanks for the smiles... I've used that Belt Install method on my EZ-Go 2pg and it was a breeze. I was attempting that with the C-Car and it was NOT cooperating. That's when I discovered the missing Button, and the Clutch being basically 'stuck' in the Over Extended position. Most likely after I either get this one freed up or replaced, the Belt will 'roll on' as mentioned. However, if not.... "I'll be Baaaach!" Much Thanks! Bruce
BrucecurB Not Yet Wild Join Date: Oct 2021 Posts: 50

12-06-2022, 11:36 AM	#23
Fairtax4me Bonafide Nincompoop Join Date: Dec 2015 Location: Charlottesburg Va Posts: 8,987	Re: Driven Clutch Bolt Removal The clutches in these tend to be a little tight, and rolling the belt on is a little more difficult than some other carts, but it is doable. To remove it you kinda have to pull up on the belt pretty hard and roll the clutch over about a half turn while pulling up on the belt, then it gives enough slack to pull the belt over the side and roll it back the other way so it will pop off. Still Way easier than changing a side by side belt!

12-06-2022, 11:21 PM	#24
BrucecurB Not Yet Wild Join Date: Oct 2021 Posts: 50	Re: Driven Clutch Bolt Removal Thanks again folks... Now off I go to the EZGo section with a 2PG Carb adjustment question! Bruce
BrucecurB Not Yet Wild Join Date: Oct 2021 Posts: 50

Similar Threads
Thread	Forum
1989 Ezgo Driven Clutch Bolt removal	Gas EZGO
Driven Clutch Bolt Breaking	Gas EZGO
Driven clutch bolt size	Gas EZGO
Driven Clutch Bolt 94 Cart	Gas Club Car
Lost bolt out of driven clutch	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum