G16 rev limiter

idunnowindows · 03-04-2009, 03:29 AM

Is there a rev limiter in the ignition on a 2002 yamaha g16
or will it just rev to the moon and blow/ valve float etc etc.

spriddle · 03-04-2009, 08:00 AM

Not sure about an 02, but my 99 G16 would float the valves. No rev. limiter.

Locascio · 03-07-2009, 01:17 PM

Ok, I just did the bypass on my 99 G16 and it goes MUCH better now. Clocked it stock with my GPS topping out at 10.8 MPH, after the upgrade I was at 20.4 MPH. My concern of over RPM's is growing quickly. What can be done to insure I do not float the valves or compromise the integrity of the engine? Thanks!

idunnowindows · 03-07-2009, 01:31 PM

I bypassed mine, and installed an iEquus 8080 tachometer 5" with shift light.
if i keep overreving it i will put a relay on the shift light signal to cut the ignition

then i can set my rev limit

just an idea for you all

if the shift light is an LED you will need to amplify it with a transistor to drive the relay

seems complicated but its really simple

03-04-2009, 03:29 AM	#1
idunnowindows Not Yet Wild Join Date: Feb 2009 Posts: 21	G16 rev limiter Is there a rev limiter in the ignition on a 2002 yamaha g16 or will it just rev to the moon and blow/ valve float etc etc.
idunnowindows Not Yet Wild Join Date: Feb 2009 Posts: 21

03-04-2009, 08:00 AM	#2
spriddle Admin Join Date: Dec 2006 Location: TN Posts: 101,856	Re: G16 rev limiter Not sure about an 02, but my 99 G16 would float the valves. No rev. limiter.

03-07-2009, 01:17 PM	#3
Locascio Not Yet Wild Join Date: Mar 2009 Posts: 37	Re: G16 rev limiter Ok, I just did the bypass on my 99 G16 and it goes MUCH better now. Clocked it stock with my GPS topping out at 10.8 MPH, after the upgrade I was at 20.4 MPH. My concern of over RPM's is growing quickly. What can be done to insure I do not float the valves or compromise the integrity of the engine? Thanks!
Locascio Not Yet Wild Join Date: Mar 2009 Posts: 37

03-07-2009, 01:31 PM	#4
idunnowindows Not Yet Wild Join Date: Feb 2009 Posts: 21	Re: G16 rev limiter I bypassed mine, and installed an iEquus 8080 tachometer 5" with shift light. if i keep overreving it i will put a relay on the shift light signal to cut the ignition then i can set my rev limit just an idea for you all if the shift light is an LED you will need to amplify it with a transistor to drive the relay seems complicated but its really simple
idunnowindows Not Yet Wild Join Date: Feb 2009 Posts: 21

Similar Threads
Thread	Forum
rev limiter g2	Gas Yamaha
Ez-go Rev Limiter	Gas EZGO
04 limiter	Gas EZGO
91 rev limiter	Gas Club Car
RPM Limiter	Gas Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum