|
12-25-2021, 08:38 PM
|
#31 |
|
Not Yet Wild
Join Date: May 2021
Location: Upstate, NY
Posts: 70
|
Re: Camp Project "Got Milk"
Got the new kingpins and old spindles in the lift arms. I do have excessive vertical play in the spindle within the arm. Really needs a good eighth inch taken up with shims. Anyone bought a shim kit and installed?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-26-2021, 05:34 PM
|
#32 |
|
Not Yet Wild
Join Date: May 2021
Location: Upstate, NY
Posts: 70
|
Re: Camp Project "Got Milk"
Well got the Rhox 6-inch lift started. Had some struggles and still do woth the angle of the rear track bar. From what I see on their how to its just a crank it down scenario. I don't really like that idea. Anyone have alternatives or did I do something wrong?
The fronts need shimming of the kingpins vertically in the c-channel of the a-arms. Awaiting a drill bit to make it work with some smaller I.D. shims. |
|
|
|
|
12-27-2021, 10:53 AM
|
#33 |
|
Not Yet Wild
Join Date: May 2021
Location: Upstate, NY
Posts: 70
|
Re: Camp Project "Got Milk"
Beginning the shim process for the front. Both have about .208 thousands of vertical play.
Correct drill bit will be here tomorrow for the I.D. |
|
|
|
|
12-28-2021, 04:19 PM
|
#34 |
|
Not Yet Wild
Join Date: May 2021
Location: Upstate, NY
Posts: 70
|
Re: Camp Project "Got Milk"
Got the front all assembled.
|
|
|
|
|
12-29-2021, 07:50 AM
|
#35 |
|
Not Yet Wild
Join Date: May 2021
Location: Upstate, NY
Posts: 70
|
Re: Camp Project "Got Milk"
Still waiting for all of my engine parts. Purchase date was the 16th. Parts were stuck in a lot for 2 days in GA till the 18th. Should have been 2-6 day shipping. So much for that. I really hate the partnership when UPS and USPS deliver packages together. So delayed and tracking is absolute garbage. So much for motor work during this week off! I expected a delay for the Holidays but not this much.....
|
|
|
|
|
01-01-2022, 04:44 PM
|
#36 |
|
Not Yet Wild
Join Date: May 2021
Location: Upstate, NY
Posts: 70
|
Re: Camp Project "Got Milk"
Continuing on with assembly. Trying a few different tires to see what size I want. Balloon looking tire is a 25x9x12 and the squared tire is 23x9x12.
Thinking 23x10.5x12 is the right size. I will need 2.5-inch wheel spacers though as the rears barely rub the inner fenders. |
|
|
|
|
01-01-2022, 08:18 PM
|
#37 |
|
Admin/Moderator
 Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: Camp Project "Got Milk"
Coming along nicely.
|
|
Ron
 PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
01-03-2022, 03:42 PM
|
#38 |
|
Not Yet Wild
Join Date: May 2021
Location: Upstate, NY
Posts: 70
|
Re: Camp Project "Got Milk"
Nothing more satisfying!
|
|
|
|
|
01-03-2022, 05:59 PM
|
#39 |
|
Not Yet Wild
Join Date: May 2021
Location: Upstate, NY
Posts: 70
|
Re: Camp Project "Got Milk"
Got the piston cleaned and rings installed. Yellow on bottom and green on top with markings pointing up!
|
|
|
|
|
01-04-2022, 08:02 PM
|
#40 |
|
Not Yet Wild
Join Date: May 2021
Location: Upstate, NY
Posts: 70
|
Re: Camp Project "Got Milk"
Assembly!
|
|
|
|
 |
| Tags |
| g16, g16a, yamaha |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| My first FULL "Sparky" Project ... Some help definitely needed | Electric EZGO | |||
| '99 TXT "Face Lift" Winter Project Completed... | Electric EZGO | |||
| project "KEEPIN IT CLASSY" yamaha g1 build | Members Rides | |||
| 1998 Club Car project "Salt Shaker" | Members Rides | |||
Linear Mode
