05-22-2012, 08:19 PM | #1 |
Getting Wild
Join Date: May 2012
Location: Canyon Lake Texas
Posts: 118
|
Confused about rattle can timing
I've been reading all of the threads about rattle can painting and I think I have all of the steps figured out but I can't find anything on the time between each step or what grit to use for sanding. I will be painting my EZGO soon and it sounds like Rustoleum is the way to go. Here's what I THINK I know so far:
1. Sand with What Grit? 2. Clean 3. Primer 4. Sand with What Grit? 5. Clean 6. Primer (how long between coats?) 7. Sand with What Grit? 8. Clean 9. Clean 10. Clean 11. Paint 12. Sand with What Grit? 13. Clean 14. Clean 15. Paint 16. Sand with What Grit? 17. Clean 18. Clean 19. Paint (how long between coats?) 20. Sand with What Grit? 21. Clean 22. Clean 23. Clear coat (how long after final paint coat?) 24. Wet sand with What Grit? (how long after clear coat?) |
|
|
Similar Threads | ||||
Thread | Forum | |||
Low speed rattle | Gas Club Car | |||
to rattle can..... | Body and Paint | |||
96 g 14 valves rattle | Gas Club Car | |||
G-19 steering box rattle | Gas Yamaha | |||
G2 rattle | Gas Yamaha |