Primary clutch mods

bangingears · 04-01-2009, 07:13 AM

Just want to say hello, I enjoy the forums and have helped me a lot. I have been thinking of lightning the weights in my primary. I have the stock primary, and was wanting to increase the RPM at which it starts engagement. I just replaced the spider with new rollers and was wondering what your thoughts were about taking 2-5 grams off each weight. I have a accurate gram scale so balance shouldn't be an issue. -Jason

dock98 · 04-01-2009, 02:54 PM

welcome to the forums.someone will be along that can help you soon.

pizzamaker · 04-01-2009, 02:57 PM

Quote:

Originally Posted by bangingears

Just want to say hello, I enjoy the forums and have helped me a lot. I have been thinking of lightning the weights in my primary. I have the stock primary, and was wanting to increase the RPM at which it starts engagement. I just replaced the spider with new rollers and was wondering what your thoughts were about taking 2-5 grams off each weight. I have a accurate gram scale so balance shouldn't be an issue. -Jason

i would leave the weights alone, go with a stiffer spring.

bangingears · 04-01-2009, 03:34 PM

I already have the stronger driven spring installed, along with the spacer. I was just thinking it might be better to bring the clutch in when the engine is revved a little higher and making more torque.

pizzamaker · 04-01-2009, 03:45 PM

Quote:

Originally Posted by bangingears

I already have the stronger driven spring installed, along with the spacer. I was just thinking it might be better to bring the clutch in when the engine is revved a little higher and making more torque.

i mean the spring in the drive clutch not the driven.

bangingears · 04-01-2009, 04:13 PM

don't have any springs in there.

pizzamaker · 04-01-2009, 04:37 PM

Quote:

Originally Posted by bangingears

don't have any springs in there.

alrighty then? good luck with that.

04-01-2009, 07:13 AM	#1
bangingears Not Yet Wild Join Date: Mar 2009 Posts: 30	Primary clutch mods Just want to say hello, I enjoy the forums and have helped me a lot. I have been thinking of lightning the weights in my primary. I have the stock primary, and was wanting to increase the RPM at which it starts engagement. I just replaced the spider with new rollers and was wondering what your thoughts were about taking 2-5 grams off each weight. I have a accurate gram scale so balance shouldn't be an issue. -Jason
bangingears Not Yet Wild Join Date: Mar 2009 Posts: 30

04-01-2009, 02:54 PM	#2
dock98 doin it in the desert Join Date: Dec 2008 Location: Sonora Desert,Az Posts: 5,603	Re: Primary clutch mods welcome to the forums.someone will be along that can help you soon.

04-01-2009, 03:34 PM	#4
bangingears Not Yet Wild Join Date: Mar 2009 Posts: 30	Re: Primary clutch mods I already have the stronger driven spring installed, along with the spacer. I was just thinking it might be better to bring the clutch in when the engine is revved a little higher and making more torque.
bangingears Not Yet Wild Join Date: Mar 2009 Posts: 30

04-01-2009, 04:13 PM	#6
bangingears Not Yet Wild Join Date: Mar 2009 Posts: 30	Re: Primary clutch mods don't have any springs in there.
bangingears Not Yet Wild Join Date: Mar 2009 Posts: 30

Similar Threads
Thread	Forum
Comet 44c primary clutch	Golf Carts and Parts
g2a primary clutch	Gas Yamaha
ezgo drive (primary) clutch	Golf Carts and Parts
1999 txt primary clutch for sale	Golf Carts and Parts
Wanted: Primary Clutch 4 Harley Cart	Golf Carts and Parts