Exhaust manifold seal?

catsnw · 11-02-2010, 10:33 PM

Is there a substitute for these. I need two really bad but I do not want to order them. Can I use RTV sealant or somthing similar?

BrewCityMusic · 11-03-2010, 07:38 AM

RTV will just blow out (and rather quickly) - the right gaskets are only a couple of $, best to do it right

WILD-BILL · 11-03-2010, 02:33 PM

You should be able to pick this up just about anywhere.

It's all I use anymore on the headers for my drag cars.

http://www.acehardware.com/product/i...LAID=109358748

squiggy · 01-12-2011, 05:18 AM

thin brass would be the only way of makin on!

tdcanada · 01-12-2011, 07:22 PM

Cats, I had a similiar problem with my 90 Marathon, I had a piece of the old gasket and went to the local auto parts place (not one of the chains a real auto parts place) He had a book and he was able to find an exhaust gasket the size of mine, but he did not have in stock. What he did have was a sheet of the metal gasket material, I think 12"x36" for $10 bucks and some change. I marked it out and drilled out the holes and used a dremel for the center hole. It seems to work very well, no leaks.

11-02-2010, 10:33 PM	#1
catsnw Getting Wild Join Date: Oct 2010 Posts: 86	Exhaust manifold seal? Is there a substitute for these. I need two really bad but I do not want to order them. Can I use RTV sealant or somthing similar?
catsnw Getting Wild Join Date: Oct 2010 Posts: 86

11-03-2010, 07:38 AM	#2
BrewCityMusic Hammer Down !!!! Join Date: Jun 2010 Location: Lake Geneva, WI Posts: 2,681	Re: Exhaust manifold seal? RTV will just blow out (and rather quickly) - the right gaskets are only a couple of $, best to do it right

11-03-2010, 02:33 PM	#3
WILD-BILL Gone Wild Join Date: Jun 2009 Location: BROOK PARK, OH Posts: 194	Re: Exhaust manifold seal? You should be able to pick this up just about anywhere. It's all I use anymore on the headers for my drag cars. http://www.acehardware.com/product/i...LAID=109358748

01-12-2011, 05:18 AM	#4
squiggy Not Yet Wild Join Date: Jan 2011 Posts: 11	Re: Exhaust manifold seal? thin brass would be the only way of makin on!
squiggy Not Yet Wild Join Date: Jan 2011 Posts: 11

01-12-2011, 07:22 PM	#5
tdcanada Not Yet Wild Join Date: Oct 2010 Location: Cumming, GA Posts: 18	Re: Exhaust manifold seal? Cats, I had a similiar problem with my 90 Marathon, I had a piece of the old gasket and went to the local auto parts place (not one of the chains a real auto parts place) He had a book and he was able to find an exhaust gasket the size of mine, but he did not have in stock. What he did have was a sheet of the metal gasket material, I think 12"x36" for $10 bucks and some change. I marked it out and drilled out the holes and used a dremel for the center hole. It seems to work very well, no leaks.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Need Exhaust Manifold 98 EZGO	Gas EZGO
louder exhaust after seal replacement	Gas Yamaha
robbins 2pg intake manifold	Golf Carts and Parts
Bolt on manifold	Gas EZGO
Briggs 20hp intake manifold	Big Block Talk!