Brake Caliper, 2004 XRT 1500, rebuild kits?

[vmusch]

Trying to get this unit up and running again, and safely stop.

Rear brake calipers seem to be in need of rebuild or repair.

Any known rebuild kits available? Anyone DIY rebuild these?

Any sources for good operating used brake calipers?

My list of guidance will continue!

Thanks

Honda Gas Motor

[Ricks_club]

What is the thickness and OD of the rotor ?

I take it that the rotor is in good condition.

Richard

[vmusch]

.24 thick
Best measurements 8 diameter

[vmusch]

Photos for reference

[Ricks_club]

What is the distance between the mounting holes on the caliber ?

What is the size of the mounting bolts ?

You may want to just search the internet for go-cart brakes.

You may be able to make this work for you:

https://cometkartsales.com/MCP-18137...with-Pads.html


Richard

[vmusch]

7/16 20 threadIMG_20230125_085952.jpg

IMG_20230125_085943.jpg

IMG_20230125_085917.jpg

IMG_20230125_085914.jpg

[Ricks_club]

I see that your mounting holes are at 3 inches. The one shown in the link I posted has the bolt Pattern 2 1/4" Center to Center, so that will not work for you.

Have you searched for parts for you brake ?

If you can find parts, what kind of prices are you seeing ?

Richard

[Fairtax4me]

Brake calipers are usually pretty generic, but I haven't seen one quite like that. I'm not real familiar with ATV or UTV style calipers, but I'm certain club car didn't go out of their way to get a special caliper made just for the limited number of carts they put these on.
Are there any logos or any other identifying marks cast on the outside of it?

[Ricks_club]

Here is my suggestion.

https://www.wilwood.com/Calipers/Cal...%20%20&appid=0

Price is right at $103

The mounting bolt holes are not the same as the one you took off, but if you have some mechanical skills, this should be easy to make fit.

Richard

[Ricks_club]

Here is a PDF of the parts list for your XRT:
https://mobilicab.com/F4hxm7zhX073ec...rryall-294.pdf

Richard