|
Design Center Shop tools, fabrication and Paint and Body |
|
Thread Tools | Display Modes |
01-22-2021, 02:48 PM | #1 |
Gone Wild
Join Date: Mar 2019
Posts: 323
|
Shortened steering column
How did you guys weld the aluminum. Looking to shorten mine, got it out and was hoping it was steel.
Sent from my SM-G960U using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-18-2021, 03:55 PM | #2 |
Gone Wild
Join Date: Mar 2019
Posts: 323
|
Re: Shortened steering column
The outside pipe is aluminum. Take off snap ring and lower bushings. Take how ever many inches off the bottom. Then cut out the same amount of the shaft. Weld the shaft put everything back together.
Sent from my SM-G960U using Tapatalk |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Club Car DS shortened steering column | Golf Carts and Parts | |||
Steering column | Electric Club Car | |||
steering column | Gas EZGO | |||
Steering joint fell off of steering column | Electric Club Car | |||
convert a tiller type steering to regular steering column | Gas Harley Davidson |