|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
12-19-2011, 06:44 PM | #1 |
Not Yet Wild
Join Date: Sep 2011
Location: Lake Anna, Virginia
Posts: 59
|
Removing kick plate and charging trim piece
Starting to replace body, cowl took 5 minutes, for the rear, how is the trim piece for the charging outlet fastened, and how is the kick plate fastened. Didn't want just start prying. TIA
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-19-2011, 07:10 PM | #2 | |
Gone Wild
Join Date: Sep 2011
Location: East Michigan
Posts: 1,364
|
Re: Removing kick plate and charging trim piece
Quote:
|
|
12-19-2011, 07:16 PM | #3 |
Gone Wild
Join Date: Sep 2011
Location: East Michigan
Posts: 1,364
|
Re: Removing kick plate and charging trim piece
|
12-19-2011, 08:40 PM | #4 |
Not Yet Wild
Join Date: Sep 2011
Location: Lake Anna, Virginia
Posts: 59
|
Re: Removing kick plate and charging trim piece
Gracias
|
12-19-2011, 11:59 PM | #5 |
Not Yet Wild
Join Date: Sep 2011
Location: Lake Anna, Virginia
Posts: 59
|
Re: Removing kick plate and charging trim piece
For those that need to do this in the future, loosen the 4 bolts around the battery bay, lift the body up an inch or so and it is much easier, the trim piece just snaps in, gently pry it out. Lift done, body done, hitch done. What a PITA the hitch was, lesson learned, run a tap through the welded on nuts first. one broke off, didn't have access to a welder, so had to dremel a small hole in the under body and use it like a regular nut. Happy with the gauge metal they used, will certainly handle more than I will ever tow.
|
12-20-2011, 12:24 PM | #6 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Removing kick plate and charging trim piece
There's actually two holes in the front of it. Stick a small screwdriver or a paper clip in one hole at a time and pry outward. It'll pop right out.
|
12-20-2011, 06:19 PM | #7 |
Not Yet Wild
Join Date: Sep 2011
Location: Lake Anna, Virginia
Posts: 59
|
Re: Removing kick plate and charging trim piece
Thanks, used a small screw driver, was wondering what those holes were for, will know next time.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G1 Floor trim/sill plate WTB | Golf Carts and Parts | |||
diamond plate trim | Gas EZGO | |||
13HP came in one piece | Big Block Talk! | |||
What is this piece on my Melex? | Melex | |||
Newbie:How can I identify my EZGO? No id plate plate present. Please help. | Electric EZGO |