lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk! > Clone Engine Swaps


Post New Thread  Reply
 
Thread Tools Display Modes
Old 08-30-2015, 12:28 PM   #1
motojoe1988
Gone Wild
Yamaha
 
Join Date: Jul 2014
Location: Long Beach, CA
Posts: 327
Default clone breather hose?

Does the clone need a breather hose on the valve head? I think that's what it is back by the exhaust? I'm getting a grease type build up. Also I bought the air filter box from v.c but I'm not really to happy with it. I'm considering getting another foam type airfilter from the motorcycle shop. Would that work? I've put about 10 or 15 hrs on it should I check the valve lash? Also my dad put 87 in the tank and never told me so it's had 1 tank of 87 ran through it . It sounds and runs great just wondering if anything might damage it?
motojoe1988 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 08-30-2015, 12:58 PM   #2
raydhd
VC 460 CLONE GONE WILD
 
raydhd's Avatar
Yamaha
 
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,594
Default Re: clone breather hose?

I would get the K&N for it.The breather is ok as it is or as I later did add the right diameter hose and exited it in one of brake cable brackets.
raydhd is offline   Reply With Quote
Old 08-30-2015, 03:51 PM   #3
motojoe1988
Gone Wild
Yamaha
 
Join Date: Jul 2014
Location: Long Beach, CA
Posts: 327
Default Re: clone breather hose?

Do I need the specific k.n filter from v.c or any that fit?
motojoe1988 is offline   Reply With Quote
Old 08-30-2015, 04:22 PM   #4
raydhd
VC 460 CLONE GONE WILD
 
raydhd's Avatar
Yamaha
 
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,594
Default Re: clone breather hose?

Depends on which carb you are using.Stocker or cvk. Measure the outer diameter and get the suitable K&N from where ever .I think I ended up on ebay.
raydhd is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk! > Clone Engine Swaps


Thread Tools
Display Modes


Similar Threads
Thread Forum
Predator 420 breather hose do I need it? Clone Engine Swaps
high engine blow by/runs better when breather hose is plugged Gas Club Car
Wanted: G1 Rear end breather plug with hose Golf Carts and Parts
Oil Spitting out the hose going to the Breather Gas EZGO
What causes Oil spitting out hose running to breather Lifted Golf Carts


All times are GMT -5. The time now is 09:14 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.