|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-14-2019, 07:55 PM | #1 |
Gone Wild
Join Date: Apr 2019
Location: Baton Rouge, LA
Posts: 204
|
Transporting G29 on Tandem Trailer
i have a Yamaha G29 with 6" lift, 23" tires and rear seat setup.
I also have a GMC Sierra 1500 crew cab with level kit and 33" tires MY trailer is a HD 16' X 6.5' tandem axle trailer. *** - When i pull cart all the way up on trailer it puts too much weight on the rear of truck/ tongue and makes for a rough bouncy ride. - I have an idea ( see photos ) where i mounted 4 D-Rings to the floor board to secure front wheels. One D-ring on front and rear of each wheel and ratchet strap ran across. I then ran strap across bottom of rear seat and cinch it to keep rear end from moving around. I haven't gone far with setup yet but wondering what your guys opinions are of this setup? Most of my hauls will be 4-5hrs one way so making sure truck and trailer and loaded properly is most important to me. Trailer still sits slightly higher in front so i may put a 2" drop ball to help level load out, what do you think? The D-Rings are 400 working lbs each, so technically 800 each side which i think is Plenty to hold the cart in place. ( 1200lb break strength per ring) |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Golf Cart loading on tandem axle trailer Qs | Electric EZGO | |||
Tandem axle build | Design Center | |||
Transporting my RXV | Electric EZGO | |||
Transporting with top on? | Gas Yamaha | |||
tandem dump trailer plans | Design Center |