|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
|
Thread Tools | Display Modes |
11-30-2021, 02:11 PM
|
#1 |
|
Not Yet Wild
 Join Date: Aug 2014
Posts: 19
|
voltage meter install
Wanting put a volt meter into my Ezgo TXT 36V. Meter has two wires on the back. When I put the leads directly to the battery I get a 38.7V reading same as my multi meter. I have wired into unit with ground going to battery and the hot from the switched side of the switch but the meter does not read anything. When i put my multi meter on the two posts on the back of the switch I get a 38V reading. Wondering what little thing I am missing?
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Volt meter/Voltage reducer stay on all the time with install of Alltrax controller | Electric Club Car | |||
| 98 TXT DCS Voltage Meter Install | Electric EZGO | |||
| "02" Club Car DS IR Digital Voltage Meter Install | Electric Club Car | |||
| Voltage meter install | Electric Club Car | |||
| Voltage meter install | Electric EZGO | |||
Threaded Mode