04-28-2013, 07:28 PM | #1 |
Gone Wild
Join Date: Mar 2008
Location: adams ny
Posts: 152
|
Who rebuilds controller
I think I have a stock 1995 ezgo and an alltrax 4448m 24-48 volt 400 amp that need a rebuild
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-02-2013, 01:28 PM | #2 |
Gone Wild
Join Date: Feb 2010
Location: Mobile, AL
Posts: 228
|
Re: Who rebuilds controller
Try FSIP they are on the left hand side of the site sponsors list. Look at the bar on top of this page, you will see a sight sponsors link you can click on. But I don't believe Alltrax controllers can be rebuilt. Somebody chime in if I am wrong.
|
05-02-2013, 02:11 PM | #3 | |
Guest
Posts: n/a
|
Re: Who rebuilds controller
Quote:
http://www.fsip.biz/ |
|
05-03-2013, 01:56 PM | #4 |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: Who rebuilds controller
U can send Alltrax the controller and they will take a look at it and see if it's rebuildable I think.
U may call PQ also and see if Carson can do anything for the curtis one. |
05-05-2013, 02:57 PM | #5 |
Not Yet Wild
Join Date: Jun 2012
Posts: 26
|
Re: Who rebuilds controller
I don't know about Alltrax controrllers, but Controller Test Services rebuilt my Curtis:
They alos upgraded it from 550 to 850 amps. |
|
|
Similar Threads | ||||
Thread | Forum | |||
How rebuilds electric motors on east coast | Electric EZGO | |||
g1 service manual and top end rebuilds | Gas Yamaha | |||
Plum Quick Bandit + 500 AMP Controller OR Executioner w/ Stock Controller | Electric Club Car | |||
Elec. vs Gas Rebuilds | Electric Club Car | |||
Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05 | Electric EZGO |