|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-11-2013, 11:46 PM | #1 |
Getting Wild
Join Date: Aug 2012
Posts: 100
|
Which solenoid to use?
I just picked up an 01 pds with a lift, 22s, and a 400 amp alltrax controller. Im getting alot of heat in the wires. Still has a stock solenoid. I am going to order a new solenoid for it and was wondering if a 200amp HD solenoid is plenty for the 400amp controller or if I need to go ahead and get the 400amp HD solenoid? Im going to upgrade all the wires to 4 gauge welding wire as well. Hopefully replacing those will stop the heat issue.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-12-2013, 12:36 AM | #2 |
Philippians 4:13
Join Date: Sep 2012
Location: Ohio
Posts: 440
|
Re: Which solenoid to use?
I would go with the HD 400 Amp solenoid
|
01-12-2013, 07:23 AM | #3 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Which solenoid to use?
With a 400A controller and 4ga cables, the 200A solenoid will probably suffice, but if there is the possibility of upping the pack voltage in the future, get the 400A continuous/1000A peak solenoid scottyb sells. The coil on it works with anything from 36V to 48V.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G9 solenoid | Gas Yamaha | |||
Solenoid or ??? | Electric Club Car | |||
Help Solenoid or OBC | Electric Club Car | |||
G1 Solenoid | Gas Yamaha | |||
Solenoid always on. | Electric EZGO |