help identify this EZ-GO year and model please 36V maybe late 90's

[yukonjoe74]

I bought this 36V EZ-GO with no batteries and the owner stating bad controller. i tested the controller in another series cart and it works fine. He stated he tested the motor buy connecting power to it. Not sure he knew what he was doing. the main battery fuse tested bad so i'm hoping that's all it is.
so i am about to start checking all other systems but i want to make sure i use the correct wiring diagram for this cart.

I am attaching pics let me know if you need any other info. I cannot find any serial number or markings anywhere on the cart. it has an Alltrax controller form 2012 and it has and aftermarket motor in it as well made by Ricks' Specialty Vehicles Augusta GA model# ES-42A-11 mfg date 05/25/04 36/48V rating class H peak HP 8.5/12.7?? if that means anything to you guys.

if I can get it working i am going to upgrade it to 48 volts and use a SR48500 alltrax controller.

Any Info would be greatly appreciated.
Thanks for your Time!

[FF Titus]

That steering is saying it's older than a 2001 1/2

[kgsc]

Rick's Speciality Vehicles builds custom carts for customers. Smaller shop just down the street from EZGo in Augusta. Anywho. If you can see the top of the frame rail next to the right rear tire you may find the serial number engraved there. And it has a D&D motor btw..

[yukonjoe74]

Originally Posted by kgsc

Rick's Speciality Vehicles builds custom carts for customers. Smaller shop just down the street from EZGo in Augusta. Anywho. If you can see the top of the frame rail next to the right rear tire you may find the serial number engraved there. And it has a D&D motor btw..

Ill check for serial. is that motor any good?? i was thinking of upgrading it to 48V and a 500amp controller maybe i can do some wheelies

[kgsc]

D&D builds good motors but you could call and check with them on exact specs. It is rated for 48 volts at 12 plus horsepower