Late model RXV motor information requested

Descart · 10-19-2015, 08:26 PM

I want to remove my motor to check the input shaft. replace (or add) a spline bumper, and do maintenance. How much does the motor weigh? Can I remove it by hand, or do I need a little lift or sling?

cgtech · 10-19-2015, 09:53 PM

I use 1 or 2 "slings" made from "ratchet straps". The motor can be pulled and put in the bagwell without disconnecting the "big wires". I used to use "dog leashes", but that motor is heavy. It never had a "bumper"

10-19-2015, 08:26 PM	#1
Descart Not Yet Wild Join Date: May 2015 Location: So. CA USA Posts: 13	Late model RXV motor information requested I want to remove my motor to check the input shaft. replace (or add) a spline bumper, and do maintenance. How much does the motor weigh? Can I remove it by hand, or do I need a little lift or sling?

10-19-2015, 09:53 PM	#2
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: Late model RXV motor information requested I use 1 or 2 "slings" made from "ratchet straps". The motor can be pulled and put in the bagwell without disconnecting the "big wires". I used to use "dog leashes", but that motor is heavy. It never had a "bumper"

Similar Threads
Thread	Forum
Model / Information Help	Gas Yamaha
EZGO TXT information requested	Electric EZGO
Late Model Springs	Gas EZGO
Model and Engine Information	Gas EZGO
Late model DS with 6-8v arrangement	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum