|
12-05-2022, 11:28 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2020
Location: Myrtle Beach, SC
Posts: 7
|
Grease Zerk on RHOX lift kit
Hi all, I have 6" RHOX lift kit on my 2015 Club Car Prescedent. While greasing the zerks on the upper A arm the zerk sheared off. Any idea what size zerk is used on these kits? I thought it was 1/4-28 but that is slightly too large diameter. I'm not familiar with zerk sizes. Any thoughts would be most appreciated. I contacted RHOX but haven't heard back from them. Tnx Ted
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-08-2022, 05:33 PM
|
#2 |
|
Not Yet Wild
Join Date: Nov 2022
Posts: 14
|
Re: Grease Zerk on RHOX lift kit
If 1/4 is slightly large I’d bet it is a 6mm but that’s just a guess based on what you say of the 1/4”
|
|
|
|
|
12-09-2022, 06:36 PM
|
#3 |
|
Gone Wild
 Join Date: Oct 2007
Location: Snellville, Ga.
Posts: 1,304
|
Re: Grease Zerk on RHOX lift kit
Take the threaded part to your local NAPA store. They should be able to match it up.
|
|
|
|
|
12-18-2022, 07:03 AM
|
#4 |
|
Not Yet Wild
Join Date: Mar 2014
Posts: 52
|
Re: Grease Zerk on RHOX lift kit
I had one break off. I used a 6mm and it was the correct size. I wound up buying a 10pack on amazon as original grease fittings are a little fragile.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Yamaha G16 zerk grease | Gas Yamaha | |||
| GTW Grease Zerk Size | Electric Club Car | |||
| Front right spindle won't take grease with new zerk? | Electric Club Car | |||
| Looking for G16 drive clutch grease zerk | Gas Yamaha | |||
| 73' D4 Grease Zerk Fittings? | Gas Harley Davidson | |||
Linear Mode
