|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-14-2009, 10:02 AM | #1 |
Not Yet Wild
Join Date: Jul 2009
Location: Charleston SC
Posts: 28
|
Stander dia. for G16
Does anyone know the standard cylinder dia. for a g16 just got it and needs a rebuild got to know if its oversized.
Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-14-2009, 06:52 PM | #2 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: Stander dia. for G16
Looking at my service manual, seems vauge. The easiest way is to check the top of the piston. no marking (std) .25 (first over) .50 (second and last over). Book says 78.00 to 78.02mm/3.070 to 3.071 ,limit 78.05mm/3.072. Piston outside diameter std-77.96to 77.98/3.069 to 3.070, oversize 1-78.25mm (3.080), oversize 2-78.50mm (3.090). Now aint that a bunch of help? Good luck Dave
|
07-14-2009, 11:23 PM | #3 |
Not Yet Wild
Join Date: Jul 2009
Location: Charleston SC
Posts: 28
|
Re: Stander dia. for G16
Alot of help.... Thanks for the info looks like its standard....
|