|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
12-31-2008, 12:59 PM | #1 |
Not Yet Wild
Join Date: Dec 2008
Location: arizona
Posts: 15
|
bent push rod
i have a honda 24 in my ezgo been running it a few months now and didnt feel like it had the right power (only had the cart a few months) for a 24 hp motor, anyways i pulled the motor to do a tune up and check welds on motor mounts and found that i had been running on only one cilinder( if standing on passenger side rear cylinder was working ) found a bent push rod on the intake side of the front cylinder. replaced rod started motor back up on stand runs fine no metal or anything else in the oil. do i need to worry about any internal damage also what would have caused the rod to bend and turn lifter sideways??? im hoping that it was just improper adjustment. motor is back in cart havent driven yet it revs and works running gear with no roblems but that is with no load.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-03-2009, 04:20 PM | #2 |
Not Yet Wild
Join Date: Dec 2008
Location: arizona
Posts: 15
|
Re: bent push rod
every thing seems ok benn running it a few days now and have had no issues yet runs like it should can break the tires loose on pavement and actually got the front tires off the ground with two adults in it
|
01-03-2009, 05:02 PM | #3 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: bent push rod
Great news! Any pix's? I really liked my Honda builds, just not as much aftermarket bolt on's and custom fab for placement into Yami's.
|
01-03-2009, 06:21 PM | #4 |
Not Yet Wild
Join Date: Dec 2008
Location: arizona
Posts: 15
|
Re: bent push rod
still learning how to use this site pics are in my albums of my cart
|
01-03-2009, 11:45 PM | #5 |
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: bent push rod
Welcome to the forum phoenix redneck racer.........
|
01-11-2009, 04:30 PM | #6 |
Getting Wild
Join Date: Nov 2008
Location: Utah
Posts: 115
|
Re: bent push rod
Welcome on sounds like a cool cart.....pics?
|
Tags |
big block talk |
|
|
Similar Threads | ||||
Thread | Forum | |||
Bent Frame | Electric EZGO | |||
When i push the pedal nothing happens | Electric Club Car | |||
Bent post on forward, reverse box | Electric EZGO |