07-30-2019, 07:01 PM | #1 |
Gone Wild
Join Date: Jul 2017
Location: West Columbia Texas
Posts: 1,036
|
Heavy duty hubs for 20mm spindles
Working with some more than generous people to put together a bearing seat set and spacer to use with steel/cast iron trailer hubs. A great upgrade if your running oversized wheels and tires, front brakes, or are generally rough on your cart.
The bearing seat and spacer will allow the use of the trailer hubs on 20mm spindles. Rear hubs will be the next step but starting with fronts. Any interest in purchasing?!?! Post below. Pricing shouldn't be to bad, the trailer hubs are about 20 dollars cheaper than OEM replacements. The new bearings are $7 a piece. I haven't got quotes on the seats yet need a few hands on measurements and figure out fitting tolerances. I'm aiming for sub $100 diy. Sent from my SM-G960U using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-31-2019, 07:14 AM | #2 |
Gone Wild
Join Date: Jul 2018
Location: Central Ohio
Posts: 1,720
|
Re: Heavy duty hubs for 20mm spindles
I'd be interested, depending on overall cost. Once I buy my 40 acres or more, I'll be putting the cart through some tough situations.
Have not looked to see if my cart has 20mm hubs yet... |
07-31-2019, 07:18 AM | #3 | |
Gone Wild
Join Date: Jul 2017
Location: West Columbia Texas
Posts: 1,036
|
Re: Heavy duty hubs for 20mm spindles
Quote:
Sent from my SM-G960U using Tapatalk |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Heavy duty hubs | Lifted Golf Carts | |||
WTB pair of spindles and hubs | Golf Carts and Parts | |||
EZGO TXT Electric Heavy Duty Rear Hubs | Golf Carts and Parts | |||
Wanted, used spindles and hubs | Golf Carts and Parts | |||
Ezgo txt spindles,hubs,etc | Golf Carts and Parts |