|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-11-2019, 10:01 AM | #1 |
Not Yet Wild
Join Date: Mar 2019
Posts: 5
|
EZGO cart 36v will move about 3 inches thats it.
Hi all..... I have an ezgo cart aprox 5 years old its badged as The Beast Huntin buddy. So here is my problem. When i switch it on it moves about 3 inches and thats it. Batteries are fully charged and checked.. they are new too. It has a Curtis PMC controller p/n 73326G07 s/n 8036-255752.
When I use the diagnostic mode I get one beep and then a continuous beep.. I am Right in thinking that it shows a faulty controller?? If so can controllers be repaired easily ?? Thanks in advance!!!! TONY |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-11-2019, 10:46 AM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: EZGO cart 36v will move about 3 inches thats it.
Only moving a few inches is a symptom of the solenoid contacts not making contact.
Does the solenoid click when pedal is pushed? Does the resistor between the large terminals on the solenoid get hot when pedal is pushed and held for half a minute or so? |
03-11-2019, 12:40 PM | #3 |
Not Yet Wild
Join Date: Mar 2019
Posts: 5
|
Re: EZGO cart 36v will move about 3 inches thats it.
The solenoid clicks I will check if it gets ho.
Thanks |
03-11-2019, 12:46 PM | #4 |
Not Yet Wild
Join Date: Mar 2019
Posts: 5
|
Re: EZGO cart 36v will move about 3 inches thats it.
No the risistor stays cool to touch..... does not get hot.
|
03-11-2019, 01:00 PM | #5 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: EZGO cart 36v will move about 3 inches thats it.
Disconnect the resistor and see if that stops it from even going 3 inches. If so, it's the solenoid.
|
03-11-2019, 01:27 PM | #6 |
Not Yet Wild
Join Date: Mar 2019
Posts: 5
|
Re: EZGO cart 36v will move about 3 inches thats it.
It still moves...
|
03-16-2019, 08:02 PM | #7 |
Not Yet Wild
Join Date: Mar 2019
Posts: 5
|
Re: EZGO cart 36v will move about 3 inches thats it.
I fixed it today!!! YEHH!! It was the solenoid.. It clicked and then this was followed almost immediately by a very quiet click. I also found my tester was faulty.! So I changed out the solenoid and the resister and it worked !!!
|
03-17-2019, 03:11 PM | #8 |
Gone Wild
Join Date: Feb 2019
Location: North Florida
Posts: 271
|
Re: EZGO cart 36v will move about 3 inches thats it.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGO Marathon Moved a few inches then nothing... | Electric EZGO | |||
1897 EZGO gas cart will not move. | Gas EZGO | |||
EZGO DCS Cart won't Move | Electric EZGO | |||
Carts move 4 inches then stops | Electric EZGO | |||
key is redundant and cart inches forward | Electric Club Car |