09-30-2021, 08:07 PM | #1 |
Gone Wild
Join Date: Aug 2016
Location: Lickin' County, Ohio
Posts: 325
|
Trimming RXV wheel wells
So I went to 23" tires and have some rear rubbing going on. The inside corners where trimmed for 20" tires when I bought it but it's about 2" out from that corner.
Can I cut the plastic with the grid pattern underneath strait across or would that weaken it to much. I'd loose about a inch of grid and part of the rib. My other thoughts are to either fabricate a one inch tubing to put between the axle and spring with alignment bumps. Or would dual action springs add any lift? I've got a single heavy duty spring now. KIMG0684_01_BURST1000684_COVER.jpg KIMG0687.jpg KIMG0685_01_BURST1000685_COVER.jpg |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-01-2021, 06:04 AM | #2 |
Gone Wild
Join Date: Oct 2008
Location: East Texas
Posts: 586
|
Re: Trimming RXV wheel wells
I've trimmed the rear inner fender a bunch on several carts.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
can you fit lifted cart in pickup between wheel wells? | Lifted Golf Carts | |||
Choosing a clutch and trimming the shafts on a Vanguard 31HP | Big Block Talk! | |||
G2 Backrest cushion trimming question | Gas Yamaha | |||
WTB 95 DS fender wells!!!!!! | Golf Carts and Parts | |||
WTB EZGO TXT rear wheel wells | Golf Carts and Parts |