Club car fe290 rebuild?

[crash12888]

Originally Posted by schillww

I just did a basket case, reseated the valves , honed the cyl new oem rings, rebuilt the carb , new generator and clutch since that wasn't in the basket one important reassembly tip make sure the timming marks line up and that plastic cam shaft is all the way into the oiler groove .use plenty of assembly lube / coat the cyl with oil , I had a great break in run for 20 minutes at medium throttle , first 3 minutes was smokin excess oil in the cyl. P.S my engine is a Kawasaki 1997 to current clockwise rotation , the starter generator is reversable so you can run it in either direction a matter of one wire .

True, but be careful, some of the starter/generators while can run in either direction, will only charge in one direction...