|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-04-2019, 10:24 PM | #1 |
Not Yet Wild
Join Date: Jan 2019
Posts: 3
|
400 amp or 600 amp solenoid help
I need some help choosing a solenoid. But first here are my cart details.
2016 Club car precedent i2 4 seats Gtw a-arm 6 inch raised suspension 14 inch rims 22 inch a/t tires Navitas 600 amp controller with on the fly programming Original club car solenoid Original club car 3.3 hp 2500 motor Full light kit And more, but not needed for my question. So far with this setup the cart maxes out at 23 mph. However, I am concerned the original solenoid won't last. I believe it's rated for 225 or 250 amps. I want to get a heavy duty solenoid. I looked into the Curtis 400/800 amp solenoid, and some Chinese 600 amp solenoid. My gut says to go with the 600. What do you guys suggest as far as amps? And why? Also do you have a brand you would recommend? Any information would be greatly appreciated. I'm burnt out... Thank you. Mark |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-04-2019, 10:29 PM | #2 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: 400 amp or 600 amp solenoid help
Your OEM is less than 100a. You need a SD400 https://www.revolutiongolfcars.com/p...lenoid-48-volt for that controller, although if you have it turned up, the OEM motor will eventually burn out. You also need 2g cables if you do not have them already.
You may want to call David Hicks at Revolution Golf Cars 706-431-3917 and seek his advice so you are setting yourself up for the best scenario. |
04-04-2019, 11:40 PM | #3 |
Gone Wild
Join Date: May 2015
Location: Houston
Posts: 903
|
Re: 400 amp or 600 amp solenoid help
Call Dave at revolution. He’s on vacation this week but contact him to get the set up you need or otherwise you are going to damage your cart by running the solenoid you have now and the 600amp set up.
|
04-05-2019, 06:01 AM | #4 |
Not Yet Wild
Join Date: Jan 2019
Posts: 3
|
Re: 400 amp or 600 amp solenoid help
I will call Dave. Thank you for the info. P.s. I plan to keep the stick motor until it dies.
|
04-05-2019, 07:43 AM | #5 |
Gone Wild
Join Date: Aug 2016
Location: Galveston, Texas
Posts: 720
|
Re: 400 amp or 600 amp solenoid help
I have a build that I did with a plum quick motor, stock controller and a 200 amp solenoid and it has plenty of torque and hits constant 25 mph and hits 30 at times. I have a feeling that if you just change out your motor your performance will really increase.
|
04-05-2019, 08:08 AM | #6 |
Cave Dweller
Join Date: Apr 2013
Location: Always On The Move
Posts: 22,229
|
Re: 400 amp or 600 amp solenoid help
I had my 700 amp controller with stock motor for 4 years before it burned up and stock solenoid for for almost 8 years before it gave out. Not saying this is the right thing to do but I didnt have any other problems during that time .
|
04-05-2019, 08:17 AM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: 400 amp or 600 amp solenoid help
That is a lot of controller. I hope you have turned the controller down for the stock motor. Something around 450 amps is safe and more amperage than that motor can use without quickly burning out.
MZJ400A with a dual stage coil has a peak capacity of 1000 amps - No need to pay more than what you see on https://www.cartsunlimited.net/solenoids.html |
04-05-2019, 09:33 AM | #8 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: 400 amp or 600 amp solenoid help
And a Series like yours are generally stronger and more forgiving then most of the tin-can sepex motors. Especially the thin GE's that were junk....
|
04-05-2019, 09:45 AM | #9 |
Not Yet Wild
Join Date: Jan 2019
Posts: 3
|
Re: 400 amp or 600 amp solenoid help
Awesome feedback. Thank you all for the information I decided to purchase the MZJ600A just to be on the safe side. Motor will be swapped when it goes kaput!
|
04-05-2019, 12:31 PM | #10 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: 400 amp or 600 amp solenoid help
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1989 Club Car DS 36v -New Vglide/Solenoid/microswitches Only moves when solenoid jump | Electric Club Car | |||
Wrong Solenoid in my cart? w/ Pics- Please suggest correct solenoid I should be using | Electric EZGO | |||
96 club car ds solenoid wont click and cart wont move unless you jump solenoid | Electric Club Car | |||
Solenoid not engaging with Forward / Reverse switch? (Solenoid is good) | Electric EZGO | |||
Help converting G1 solenoid setup to single G16 solenoid | Gas Yamaha |