|
Lifted Golf Carts Off-Road Golf Carts. |
|
Thread Tools | Display Modes |
07-19-2015, 10:41 PM | #1 |
Not Yet Wild
Join Date: Sep 2013
Posts: 23
|
Need help - jakes lift kit and brakes issue
I have a ds that I lifted with jakes (double a arm). Three issues:
1. When going in reverse (especially down a SLIGHT downhill I tap the brakes and the pedal slams back against my foot (basically lock up the brakes) and cart brakes lock up. When going forward all operates as normal. 2. It seems the jakes rear lift blocks slide (rotate) along the back axle - I have tightened the uBolts to maximum tightness but am thinking that my brakes are due to the axle slightly rotating in reverse causing the brakes to lock up (cables tightening). 3. Replaced rear drum brake pads and they seem to be always slightly engaged when driving. they are self adjusting brakes so how do I release some tension? I've loosened the cables so they aren't tight but still seem to "rub" the drums during normal driving. Anyone have these issue? Would love to get the Allsports rear lift brackets (fit inside the stock axle brackets so rotation isn't possible - jakes you should replicate :) but they won't sell the rear bracket by itself and I don't want to buy a whole new double a arm lift....should have probably bought the Allsports? Also If anyone knows a good cart guy in St. Louis area let me know and I will gladly take it there. 3 kids don't allow much cart repair time :) Let me know your advice... Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-20-2015, 12:03 AM | #2 |
Gone Wild
Join Date: Sep 2012
Location: Missouri
Posts: 2,755
|
Re: Need help - jakes lift kit and brakes issue
I sent you a PM Dan........... But will post here as well.
If you were a bit closer I could probably fix the rotating for you and your probably correct with the brakes. Post a couple pictures of the blocks your talking about. I think I know what your talking about and my fix if I'm thinking right would be too tack weld the blocks to the rear housings. Other than that, without having the cart and seeing it first hand, not sure how I'd fix it. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Jakes Spindle Lift King Pin Issue | Electric EZGO | |||
Jakes Brakes on All Sport lift | Design Center | |||
Installed 6" Jakes Lift - Now no Brakes! | Electric Club Car | |||
Jakes Lift Kit Tie Rod issue | Electric EZGO | |||
Brakes sticking on drivers side after jakes 6 inch lift? | Electric EZGO |