|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
|
|
04-14-2011, 01:54 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2010
Posts: 52
|
LED turn signal flasher unit
Hello All,
I am installing new lights on my 2001 DS 48v. I have a 7 wire std. turn signal kit. All is wired right and everything is working ok except the lights are not flashing. I have a standard 3 prong flasher unit. I investigated my lights and thelights are LED at least the front signal lights are and I am assuming the rear are also. So i understand I need another type flasher that will work with led's. Anyone know exactly what I need and where to get one and proper wiring? Thanks, Kim |
|
|
|
04-14-2011, 02:23 PM
|
#2 |
|
Gone Wild
 Join Date: Oct 2010
Location: Panama City, FL
Posts: 1,408
|
Re: LED turn signal flasher unit
you either need a flasher that isn't load dependent, or you can add a load to your current flasher.
try a standard car turn bulb in parallel with your flashers. its ghetto, but it works. another thing you try is to open the unit and adjust the load threshold. look for a trimmer pot inside. good luck! -sj |
|
|
|
|
04-14-2011, 08:19 PM
|
#3 |
|
Not Yet Wild
Join Date: Jul 2010
Posts: 52
|
Re: LED turn signal flasher unit
SJ,
Thanks, I wired a old side light from an old Goldwing I used to have (small peanut bulb) and all works perfect! Thanks, Kim |
|
|
|
|
04-15-2011, 01:42 AM
|
#4 |
|
Gone Wild
Join Date: Oct 2010
Location: Panama City, FL
Posts: 1,408
|
Re: LED turn signal flasher unit
np! thanx for the follow-up!
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 7 wire turn signal / flasher question | Gas EZGO | |||
| ezgo signal flasher hook up | Electric EZGO | |||
| Wiring in a turn signal/flasher/brake switch. | Electric EZGO | |||
Hybrid Mode