|
On Road Golf Carts! Low to the ground Golf Carts! |
|
Thread Tools | Display Modes |
06-09-2009, 07:34 PM | #21 |
What in the?
Join Date: Apr 2009
Location: Lake Worth FL
Posts: 454
|
Re: My lowered E-Z-GO build thread
I almost forgot to add, when I lowered my cart I cut 3/4'' off both sides of the steering shaft (so it doesn't bottom out when theres weight on the cart) and I ground down the inside edges of the u-joints on the shafts ends (so it doesn't bind when lowered).
When I lowered the rear, the brake cables were rubbing on the inside of the back wheels and the leaf springs were pushing them down, so I rerouted them above the leafs. Just some advise to those planning on doing this in the future. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-12-2009, 10:37 AM | #22 |
Monkeylicious
Join Date: Apr 2008
Location: Mississippi
Posts: 952
|
Re: My lowered E-Z-GO build thread
Hotcat,
Been tied up and missed seeing this post. Looking good so far, keep the pics coming. Just a note, if you cut the steering down, you might have to run some sort of a limiting strap to keep from over extending your front end and pulling the steering shaft apart. With max lift, mine almost comes apart. Just something to think about. Keep up the good work! |
06-12-2009, 06:16 PM | #23 | |
What in the?
Join Date: Apr 2009
Location: Lake Worth FL
Posts: 454
|
Re: My lowered E-Z-GO build thread
Quote:
I thought about that with the shaft but I dont plan on going that high up and I only cut off 3/4'' just to be safe I just installed my wheels today, I will get pics this weekend |
|
06-17-2009, 08:22 AM | #24 |
Gone Wild
Join Date: Apr 2009
Location: Houston,TX
Posts: 408
|
Re: My lowered E-Z-GO build thread
Show us pics when you get the wheels on!
|
06-17-2009, 11:51 AM | #25 |
What in the?
Join Date: Apr 2009
Location: Lake Worth FL
Posts: 454
|
Re: My lowered E-Z-GO build thread
|
06-17-2009, 11:54 AM | #26 |
Maybe This Weekend :)
Join Date: May 2009
Location: Lake Norman, NC
Posts: 6,411
|
Re: My lowered E-Z-GO build thread
What led dome light kit did you get?
|
06-17-2009, 05:29 PM | #27 |
What in the?
Join Date: Apr 2009
Location: Lake Worth FL
Posts: 454
|
Re: My lowered E-Z-GO build thread
After searching for a good LED dome light I decided to go with these http://cgi.ebay.com/ebaymotors/5-12V...1%7C240%3A1318 The prices for an actual LED dome light in the size I needed were crazy, plus I can place these in an x pattern under the roof with 1 in the center to give me light through out. I wanna wire them to my alarm system so I have illuminated entry |
06-21-2009, 12:00 PM | #28 |
What in the?
Join Date: Apr 2009
Location: Lake Worth FL
Posts: 454
|
Re: My lowered E-Z-GO build thread
UPDATE......
I finally had some time this weekend to get some parts installed and take pics. Parts installed include... SS112 wheels with positive offset and low profile tires Wheel locks Silver E-Z-GO front emblem Head light kit with LED tail lights from East Coast Custom Golf Carts Custom head lights with blue lens installed in stock bezels Hyper white H3 light bulbs 12V Automotive battery with tray and tie down (for my 12V accessories) Yesterday as me and the wife were walking through Walmart I stopped by the automotive lighting section to look for some head lights I can upgrade to, I found exactly what I was looking for except they had blue lenses, I decided to by them anyway and try them out, If I didn't like them I could always return them. I rush home, take apart my lights and installed the new ones, I was a little disappointed at first cause they didn't carry the same lights with clear lenses Now after looking at them for awhile, I think they are growing on me and I'm starting to like them Give me some honest opinions on the head lamps good/bad, I wanted to be different and I think I got it. I found someone on E-Bay selling the same lights but with clear lenses, I can still return the blue ones and get clear. I plan on changing out the head light bulbs to H3 LEDs and the front marker lights to clear lens with amber LED lights to save on power |
06-21-2009, 12:07 PM | #29 |
What in the?
Join Date: Apr 2009
Location: Lake Worth FL
Posts: 454
|
Re: My lowered E-Z-GO build thread
I could have got the LED light pods with a white housing but got them in black for when I paint my top. |
06-21-2009, 12:17 PM | #30 |
What in the?
Join Date: Apr 2009
Location: Lake Worth FL
Posts: 454
|
Re: My lowered E-Z-GO build thread
Stock lens with hyper white H3 bulbs
Stock lens with hyper white H3 bulb pattern Blue lens with hyper white H3 bulbs Blue lens with hyper white H3 bulb pattern Dome lights |
Tags |
2005, air shocks, e-z-go txt, lowered, slammed |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Lowered Club Car | On Road Golf Carts! | |||
Lowered 2003 EZ-Go | On Road Golf Carts! | |||
Lowered with a big block - The new build "Madness" has started..... | On Road Golf Carts! | |||
Lowered g16a | On Road Golf Carts! | |||
Lowered EZGO RXV | On Road Golf Carts! |