07-24-2021, 11:22 PM | #1 |
Not Yet Wild
Join Date: Feb 2020
Location: Dinwiddie, VA
Posts: 34
|
Gtw lift alignment issue
Ok so I installed a gtw lift kit on a 87 cc ds. The camber is adjusted however the toe is still an inch off from front to back of the tire. I've adjusted it all the way in. Just wondering if anyone else had this issue. I can shorten the rod but you wouldn't think you should have to.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-25-2021, 06:21 AM | #2 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,928
|
Re: Gtw lift alignment issue
Yep! that happened with my Madjax 3-1/2'" lift!
DO NOT cut the rod!!! Adjust the lower Heim joints OUT 2 turns each side, (even though the instructions may tell you to leave the lower Heims all of the way in... like mine did.) reinstall the lift, and recheck the toe adjustment, If the toe is barely adjustable, turn the lower Heims out no more than a 1/2 to 1 more time! It's kind of a pain to take almost everything apart, and put it back together again, but at least you wont have to go through what I did! Here's my long-winded thread about it: https://www.buggiesgonewild.com/showthread.php?t=105591 |
07-25-2021, 09:21 AM | #3 | |
Not Yet Wild
Join Date: Feb 2020
Location: Dinwiddie, VA
Posts: 34
|
Re: Gtw lift alignment issue
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alignment issue | Gas Yamaha | |||
Weird alignment issue | Lifted Golf Carts | |||
Madjax 6” lift alignment bolt issue | Electric EZGO | |||
alignment issue | Lifted Golf Carts | |||
Wheel alignment issue with Jake's lift | Lifted Golf Carts |