|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-21-2021, 07:28 AM | #1 |
Not Yet Wild
Join Date: Sep 2015
Posts: 13
|
97 EZGO One spark problem
Cart cranks but no go. I only get one small spark when I first push the gas pedal. Grounds are good, all wiring has been ohmed out (rung) New CDI, good coil and pulser. So i read that the flywheel needed to be magnetic. Does anyone know if this statement is true, that the flywheel could loose it's magnetism. I'am totally frustrated with this cart and see this problem mentioned often on this forum and bound to find the correct answer. It is so difficult to repair these older carts with all the crap Chinese parts out there. SHAME ON YOU EZGO.
ANYBODY FIND THE ANSWER? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-21-2021, 07:51 AM | #2 | |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,215
|
Re: 97 EZGO One spark problem
Quote:
|
|
07-21-2021, 10:15 AM | #3 |
Not Yet Wild
Join Date: Sep 2015
Posts: 13
|
Re: 97 EZGO One spark problem
Trig: The parts are from China and Tiwan and the CDI from the local ezgo dealer. The coils have been tried on a running cart and check ok. i haven't tried the 3 CDI's yet. I'm afraid to put them on the running cart I use for golf in case they screw it up. Thinking of going the HEI route. Just can't seem to get more than one spark on start up. Currently waiting for new generator brushes as I've pulled that apart because 1 brush was a lot short than the others and past the all used up indicater. Thanks for the flywheel info as all the net seems to have is lawn mowers with magnets inside the flywheel.
|
07-21-2021, 06:17 PM | #4 | |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,215
|
Re: 97 EZGO One spark problem
Quote:
I wouldn't go with the HEI. Find out what the problem is with yours. I have tested a few ignitors for members by installing on one of my carts and see what happens. So far all I have checked have been defective. I got a drawer full of bad ones. Another thing other than a bad ignitor causing the one spark thing is someone by mistake installs the battery in backward. If I remember correct if it is in backward it will fire one time just before the engine stops turning over. Because from the factory both cables on many of these carts are both black , its very easy to do this. |
|
07-22-2021, 02:35 AM | #5 |
British born Nincompoop
Join Date: Feb 2007
Location: United Kingdom
Posts: 2,461
|
Re: 97 EZGO One spark problem
|
07-22-2021, 11:18 AM | #6 |
Not Yet Wild
Join Date: Sep 2015
Posts: 13
|
Re: 97 EZGO One spark problem
OK --- Battery is defintly Neg to frame Grounded. Why do you not like the HEI method it looks pretty simple. At this point I will do any thing to get my sparks.
|
07-22-2021, 11:43 AM | #7 | |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,215
|
Re: 97 EZGO One spark problem
Quote:
I just never have the problem with firing most do and I work on these things a lot. I also have several OEM ignitors I keep if I think that is the problem. Check where the pulser coil plugs in going under the fan cover. More than once I have I found it not making a good connection. I can't stress enough about removing the plate that the ignitor bolts to and see how much rust is on it. Does the ignitor you got from ezgo have KOKSUN DENKI CO. LTD plus made in Japan written on it ? |
|
07-22-2021, 12:34 PM | #8 |
Gone Wild
Join Date: Jul 2015
Location: Central South Carolina
Posts: 937
|
Re: 97 EZGO One spark problem
The cheap China ignitors you can buy on eBay and Amazon are ALL junk and money thrown up a cats butt.
|
07-24-2021, 01:39 PM | #9 |
Not Yet Wild
Join Date: Sep 2015
Posts: 13
|
Re: 97 EZGO One spark problem
Trig123 The igniter (original) that was on the cart that I think is bad matches your description. The one from China - no markings what so ever. The one from the dealer is only marked Tiwan. The dealer said he would replace it because i checked it and the one from China on my running 92 Marithon and no go. I just replaced the brushes in my
starter/generator thinking this may help because they were past the ware marker, but still only one spark. The built in rev limiter is interesting, I didn't know one existed. Could not find anything in the manuals about rev limiting. I thought it was all mechnical wit the carborater linkage. My next step is to reinstall the original CDI and retry it again. I will also reconnect the next one from the dealer. If no success, i will get the 1977 Nova ignition module. I refuse to give up. |
07-24-2021, 01:42 PM | #10 |
Not Yet Wild
Join Date: Sep 2015
Posts: 13
|
Re: 97 EZGO One spark problem
SHTREATT --- I'm living proof of your statement !
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Ezgo 295 93 gas spark problem | Gas EZGO | |||
99 ezgo spark problem | Gas EZGO | |||
82 Ezgo Spark problem. | Gas EZGO | |||
97 ezgo spark problem, opinions? | Gas EZGO | |||
1999 EzGo Spark Problem, please help | Gas EZGO |