6" lift installed tires wedging in when going forward

[eph78]

I think it might be the tie rod adjustments but also want to know what bolt hole do I use on the front A-Arm? There are four of them.

Attached is a picture, it does this when rolling forward. The tires correct parallel when pushing it backwards.

Thanks!

[eph78]

Trying to get the photo to align correctly.

[eph78]

Seems like my attempts to align my photos are as good as my attempts to align tires!!

[Nhjohnny1]

Move the shocks to the third hole from where they are now to start and see how that looks, the holes are to adjust camber for different carts

[CustomCurt]

is there any other adjustments besides the shock absorber mount holes?

[eph78]

No other adjustments I could find here is a picture of the while driving backwards.

Think my shocks are not enough do you want the bigger tires?


I will also try the third hole. These are 23" tires if it helps maybe too much for the stock shocks.

Thanks for the replies.

[eph78]

Closer pictures.

[crash12888]

If your alignment is not correct it will also do as you say. It looks as if your toe is in to much so when you go forward the tires are trying to roll to the center of the cart and when you back up the tires are trying to roll apart.

[crash12888]

It will be less noticeable on dirt or gravel where the tires have more tendency to slip.

[eph78]

Thanks, I will play with the alignment again. I have read sometimes people flip their tie rods over to get more adjustment. seems really bumpy and twitchy when trying to drive it also.

Might get some spacers also to give it a wider foot print.

Thanks!