05-28-2021, 06:00 AM | #11 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: 16hp duromax rockers
I used a brand new cutting wheel on my dremel tool, worked great. If you cut slow you won't even have any burrs. I installed the end with two blocks of wood and a hammer, super easy. The ones I used were the Chromoly ones.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-28-2021, 11:33 AM | #12 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: 16hp duromax rockers
You need to make sure your length is very accurate AND however you cut the push rod that it is cut dead square straight across @ 90 degrees. There was a video of them being cut on something like a lathe on VC's site. Some youtube videos on cutting VW push rods to length. Funny story on push rod lengths. Mine are exactly 6.700 , Shepard's 6.995 and VC's 6.740. But between milled heads and different head gaskets there is about .090" from the thinest head gasket and a head milled .075"
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Champion Shaft rockers with duromax help | Big Block Talk! | |||
Duromax 16HP | Clone Engine Swaps | |||
duromax 16hp | Clone Engine Swaps | |||
Clutch for 16hp. duromax | Gas Club Car | |||
Duromax 16hp in 05 TXT? | Clone Engine Swaps |