01-26-2019, 10:12 AM | #1 |
Gone Wild
Join Date: Nov 2018
Location: Lady Lake, FL.
Posts: 457
|
DIY 101 - 14 cell Nissan Leaf lithium pack
Ok, there are a bunch of great build threads on here for the Leaf cells and I am pretty sure that I have read them all several times over and I am thankful for the information and help the folks on BGW provide daily to us backyard knuckle bangers.
I just finished up the last details from building my first pack last night and while I am happy with it there are things I will do differently this time and I did not go into a lot of detail on my last build thread... I realized that I have a unique opportunity to actually to learn on one build and then document a second build once I had a clue what I was doing. So I figured that while I still have the wide eye deer in the headlights look and still remember what I didn't know I would try and organize my newly found skills and knowledge. The basic system: - 14 cell, 120 ah. (~ 40 mile range?) - $2,050. - Zeva 8-16 Cell BMS, VM3 monitor and CAN bus current sensor, temp sensor and Gigavac 240 contactor (for both HV and LV disconnect) - $525 - 58.4v, 10 amp charger (out of stock so this may change...) - $90 There are many ways to get this project done and I welcome input and lessons learned from others that have built packs. My first pack is in a '05 CC Precedent this pack is going into a '16 EZGO RXV. But it really doesn't matter anymore than it matters what you put a AA battery into. Sourcing the big parts: I started with two 14 cell sets from the EV Battery Center out of a 2017 Nissan Leaf. Neli does not keep the website updated with current inventory, call her to see what she has. The modules are also available on Ebay there are a number of recent threads on sourcing modules. EV did not have the DIY kits or DIY end plates in stock, I was getting ready to fabricate my own when I got two sets from Pingeye3. I did ask EV to include the OEM end plates in case I needed a plan B for mounting as well as the original BMS tap connectors. Sent from my SM-G960U using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-26-2019, 10:31 AM | #2 |
Gone Wild
Join Date: Nov 2018
Location: Lady Lake, FL.
Posts: 457
|
Re: DIY 101 - 14 cell Nissan Leaf lithium pack
I am building this basic system but with the 600 amp CAN bus current sensor instead of the current shunt and I will add a sleep switch.
Pingeye3 provided me with a CAD wiring diagram for the first pack I did. We have since changed from using two disconnect relays to using just the single Gigavac 240 contactor and moved a wire to allow the system to be reset easier. The BMS HV relay and LV relay connections are wired in series using the Gigavac to isolate the battery pack in the event of either high or low voltage condition. I will post the wiring diagram after I have made the corrections. More on this later... Sent from my SM-G960U using Tapatalk |
01-26-2019, 10:47 AM | #3 |
Gone Wild
Join Date: Jul 2018
Location: Central Ohio
Posts: 1,720
|
Re: DIY 101 - 14 cell Nissan Leaf lithium pack
I'll be following this. Your other build was high quality! I've been hoping someone would do a very detailed build thread of this system!
|
01-26-2019, 11:30 AM | #4 |
Gone Wild
Join Date: Aug 2008
Location: Leander TX
Posts: 166
|
Re: DIY 101 - 14 cell Nissan Leaf lithium pack
Nice job, your first build was very clean and fun to watch. Looking forward to the next.
|
01-26-2019, 11:46 AM | #5 | |
Gone Wild
Join Date: Nov 2018
Location: Lady Lake, FL.
Posts: 457
|
Re: DIY 101 - 14 cell Nissan Leaf lithium pack
Quote:
Sent from my SM-G960U using Tapatalk |
|
01-26-2019, 11:54 AM | #6 |
Getting Wild
Join Date: Dec 2018
Location: Music City USA
Posts: 149
|
Re: DIY 101 - 14 cell Nissan Leaf lithium pack
Gonna be entertaining to watch and fun to learn. Thank you.
|
01-26-2019, 01:49 PM | #7 | |
Gone Wild
Join Date: Aug 2008
Location: Leander TX
Posts: 166
|
Re: DIY 101 - 14 cell Nissan Leaf lithium pack
Quote:
|
|
01-26-2019, 04:33 PM | #8 |
Gone Wild
Join Date: Nov 2018
Location: Lady Lake, FL.
Posts: 457
|
Re: DIY 101 - 14 cell Nissan Leaf lithium pack
The end plates provide a solid surface for compressing the cells when you tighten the all thread and a and a bracket for securing the pack to the tub. You can see the aluminum ones which are 3/16" aluminum sheet which has been cut and drilled to match the pack and has a lip that has been folded and drilled for mounting. With flat end plates you can also use aluminium angle drilled to match the bottom pack holes then drilled and screwed to the tub bottom. For pack end plates I've people use the OEM steel plates (pictured below), diamond plate, aluminum plate, one guy even used plywood... Uhm... I wouldn't recommend that.
Sent from my SM-G960U using Tapatalk |
01-26-2019, 05:03 PM | #9 |
Gone Wild
Join Date: Nov 2018
Location: Lady Lake, FL.
Posts: 457
|
Re: DIY 101 - 14 cell Nissan Leaf lithium pack
So on the end of each module there is a Positive, Negative and center tap.
Let me pull out my soap box... Do not allow the terminals to short!!! REALLY BAD S#*T CAN HAPPEN if you accidentally short these! Also as you assemble your pack you need to be mindful of the orientation of these terminals and where your B+ and B- will be located. I start with 2 modules with Negative terminal on top, then two positive on top and so on. If your building a seven module pack then you would alternate each module. Sent from my SM-G960U using Tapatalk |
01-26-2019, 05:19 PM | #10 |
Gone Wild
Join Date: Nov 2018
Location: Lady Lake, FL.
Posts: 457
|
Re: DIY 101 - 14 cell Nissan Leaf lithium pack
The holes in the modules are 8mm. Understand that the all fjread will no be bearing weight from the side it is only used to hold the modules snugly together. You can order 8mm allthread or get it from Fastenal or use 5/16" or 1/4". The 1/4" was a little loose for me so I used 5/16" from Lowe's and I had to finesse it a couple of times but they were still all stacked in a couple of minutes. Some people have had problems using 5/16" allthread. Your call.
I added final dimensions. Sent from my SM-G960U using Tapatalk |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha Drive with Lithium Nissan leaf batteries | Lithium Yamaha | |||
05 CC Precedent 14 cell Leaf Lithium conversion. | Lithium Club Car | |||
A look inside Nissan Leaf lithium battery pack | All things Lithium | |||
Lithium Nissan Leaf conversion x 2 | Lithium Club Car | |||
Nissan Leaf Balancing | Electric EZGO |