|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-07-2014, 10:18 AM | #1 |
Not Yet Wild
Join Date: Jul 2014
Location: Benson NC
Posts: 4
|
need a part # for replacement circuit board
This might have been already posted but I have seen so many diff part numbers I just want to be sure. My charger is an ez-go LR 69689, and the circuit board thats in it has a part # on it thats 3794905. It is not a power wise, all it has is EZ-Go textron on it. I need to do a littly more checking but I think the relay is bad. I have jumped the relay and the charger will come on. Not plugged into the cart it comes on when jumped, does that mean its bad ? Need to check the batteries first I quess? It is at my daughters house so I am running back and forth and reading some more. If any one can give the correct replacement board # that would be a big help. Love this forum just need to do some more reading. thanks a lot
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-07-2014, 11:27 AM | #2 |
Guest
Posts: n/a
|
Re: need a part # for replacement circuit board
ez-go LR 69689 = EZGO Textron Total Charge
EZGO Module Control Board - Total Charge 1/3/4 link to part http://www.golfcartking.com/EZGO-Mod...2810892%29.htm |
07-07-2014, 12:34 PM | #3 |
Not Yet Wild
Join Date: Jul 2014
Location: Benson NC
Posts: 4
|
Re: need a part # for replacement circuit board
Thanks a million, with a little more troubleshooting I will be good to go. I hope.
|
07-07-2014, 01:18 PM | #4 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,005
|
Re: need a part # for replacement circuit board
Before I changed the board I would see if this charger worked on another cart and possibly borrow a charger to test on yours. Just to eliminate the one isn't causing the other.
|
07-07-2014, 01:21 PM | #5 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,535
|
Make sure the little clip inside the plug that senses the voltage is making a good connection. I have seen that cause the charger not to start up.
|
07-07-2014, 01:22 PM | #6 |
Guest
Posts: n/a
|
Re: need a part # for replacement circuit board
|
07-07-2014, 01:28 PM | #7 |
Guest
Posts: n/a
|
Re: need a part # for replacement circuit board
never seen a senses wire on a total charger .. they are the old style chargers
Last edited by crash test dummy; 07-07-2014 at 01:32 PM.. Reason: added diagram |
07-07-2014, 01:40 PM | #8 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,535
|
Ok, I misread the post. I was thinking about the powerwise charger.
|
07-07-2014, 01:49 PM | #9 |
Not Yet Wild
Join Date: Jul 2014
Location: Benson NC
Posts: 4
|
Re: need a part # for replacement circuit board
thanks everyone, I will check all of this before replacing anything. Crash Test, that is exactly the charger I have, where can I find that so I can print a clear copy?
|
07-07-2014, 02:24 PM | #10 |
Guest
Posts: n/a
|
Re: need a part # for replacement circuit board
It is in the 94~95 ezgo parts manual
page C-1 and wiring diagram C-2 http://www.eastcoastcarts.com/tools/technical-manuals also you can click on attachments and click again after they open and get full size ... then right click and save image to your computer here they are |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
diode part number ? OR replacement | Harley Davidson | |||
1996 EZGO DCS circuit board placement | Electric EZGO | |||
Anyone know where I can buy a replacement cover for this part? | Electric Club Car | |||
Charger Circuit Board Adjusting | Electric golf carts | |||
1997 resistor/diode circuit board orientation | Electric EZGO |