|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-16-2008, 03:34 PM | #1 |
Not Yet Wild
Join Date: Feb 2008
Posts: 3
|
1999 EZ GO stopped running
Greetings,
I have an EZ GO 1999 model. This morning it was being driven and the driver stopped to chit chat. When he put his foot on the gas (from a stopped position) he heard an audible pop (I am not sur if the pop was the normal cylinoid noise or something else), and the cart would not go. I get a minimum 6.2 volts from each battery, and the cylinoid reads 38.2 volts when I depress the gas pedal (this is reading on the small bolts to the front, not the larger outside ones). I have checked/cleaned posts and connections on both the motor and the batteries. The F/R switch appears tp be fine with no burnt wires visible. The back up alarm sounds as it should in reverse. Around the cylinoid/throttle control there is a faint smell of burnt wire/plastic, but nothing visible at all. I blew everything off to clean it and still no evidence of burned wires. I turned the headlights on and hit the gas and the cylinoid clicks (as it has every time) and the headlights do not even flicker, so I am sure the battery/voltage is not an issue. Any help would be great. Thank you. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-16-2008, 05:40 PM | #2 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,283
|
Re: 1999 EZ GO stopped running
Is you forward/reverse switch activated directly by the lever or is there a long metal rod running from the lever location to under the passenger seat? This will determine which drive system you have.
|
02-16-2008, 07:25 PM | #3 |
Not Yet Wild
Join Date: Feb 2008
Posts: 3
|
Re: 1999 EZ GO stopped running
It has the long rod.
|
02-16-2008, 10:07 PM | #4 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,283
|
Re: 1999 EZ GO stopped running
That means you have a Series or Fleet cart. Let's start by giving every large cable a good twist and tug. If all the cables (even back to the motor) are intact, lift the rear of the cart on stands and jump the large posts of the solenoid with a 6g cable. If the cart runs when key is on, cart is in gear, and pedal depressed, the solenoid has failed and needs replacing.
|
02-16-2008, 11:02 PM | #5 |
Just me. .
Join Date: Sep 2007
Location: Pensacola, FL
Posts: 1,092
|
Re: 1999 EZ GO stopped running
do you own a voltmeter?
|
02-17-2008, 04:44 PM | #6 |
Not Yet Wild
Join Date: Feb 2008
Posts: 3
|
Re: 1999 EZ GO stopped running
I will jump the large posts and see what happens...I do have a voltmeter. Thanks
|
02-17-2008, 06:57 PM | #7 |
WILD
Join Date: May 2007
Location: lebanon county,pa
Posts: 1,266
|
Re: 1999 EZ GO stopped running
Then you could check how many volts are going into the solinoid the press the peddle and see how many volts are going out, if theres no voltage its ether somewhere before the solinoid or its time to buy a new one.
|
02-17-2008, 07:20 PM | #8 |
Just me. .
Join Date: Sep 2007
Location: Pensacola, FL
Posts: 1,092
|
Re: 1999 EZ GO stopped running
Well if the solenoid is clicking its nothing before the solenoid...... If its not clicking test voltage to small post see if you are getting voltage... If so, its nothing before the solenoid, replace solenoid. If no voltage, find problem before solenoid......
If your solenoid clicks test voltage going through as caddymankc suggested. Keeping in mind there is a resistor providing voltage to the controller side. If solenoid is fine, follow voltage into controller B+; Then you can follow voltage coming out of your controller. With enough patience, or a wiring diagram you should be able to determine where the voltage should be.. |
04-12-2012, 11:29 AM | #9 |
Not Yet Wild
Join Date: Apr 2012
Posts: 1
|
Re: 1999 EZ GO stopped running
My taillight would not go off-discharged the batteries. Now all i get is a flicker on the charge meter on the dash. Where do I start to fix?
Thanks- 50ladybug Port Ludlow WA |
04-12-2012, 12:50 PM | #10 | |
Gone Wild
Join Date: Aug 2011
Location: Tyler, Texas
Posts: 661
|
Re: 1999 EZ GO stopped running
Quote:
If you completely discharged your batteries you will have to charge them individually or 2 at a time until you get enough voltage for the charger to see them. |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
1999 EZGO Jacobson Workhorse | Gas EZGO | |||
Another 1999 Club Car gasser | Golf Carts and Parts | |||
1999 Club Car gasser | Golf Carts and Parts | |||
my 1st golf cart 1999 EZgo | Gas EZGO |