1995 Medalist transformation

[70oldsracer]

Here are some pics of the transformation of my 1995 medalist. I got the cart at the end of September for free, but it was not running, a wiring mess and it had no batteries. I knew I wanted it strictly for hunting and I already had ideas of what I was going to do. Thanks to this site and it's members, I was able to turn a non running golf cart into a nice hunting cart.

[70oldsracer]

I installed a 6" lift kit, a new shock cover I made myself and The original wood for the seat was shot, so I cut a new piece out of 3/4" pressure treated plywood, painted it and made some new black seat covers.

[70oldsracer]

I installed some new 22" tires and rims and started the camo wrap process.

[70oldsracer]

next was the new controller mount, new controller and solenoid and install of the reversing contactor

[70oldsracer]

Then the wiring up of all the components.

[70oldsracer]

A good friend of mine gave me four 12v 75 AH batteries, so I needed to fabricate a new battery tray that I could just bolt in so I could remove it if necessary.

[70oldsracer]

Finally found the front cowl piece and started installing fender flares and the new fwd/rev switch and digital volt meter.

[70oldsracer]

Then I made a new switch plate for my rocker switches and my FN1 and installed a new 12" light bar.

[70oldsracer]

Cart is running great now and I'll post more pics as I do more. Windshield and clays cart are on order and will be installed soon. Thanks for looking

[MILLERTIME]

Very nice.