|
08-27-2019, 07:28 PM | #1 |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Controller
Is this pin #6 suppose to have a wire connected to it? The one circled in red?
It has a pin in it but no wire. #5 has no pin are wire and it's not suppose to. I can't remember if 6 is though. |
08-27-2019, 07:59 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Controller
Nope. Always been 5 wires in a 6 pin plug.
Maybe it was for future use that never came? |
08-27-2019, 08:06 PM | #3 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Controller
Isn't it 4 wires in a 6 pin plug?
|
08-28-2019, 08:20 AM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Controller
|
08-28-2019, 08:57 AM | #5 |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: Controller
Thanks guy's the picture had me confused and second guessing myself! Thanks.
|
08-28-2019, 06:21 PM | #6 |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: Controller
The controller was the one in this picture. I took and cut all the bad spots in the wiring and replaced the 3 motor cables to the F/R with old stock ones I had. Installed a old rebuilt F/R board and cam with 2 new micro switches. The cart will run in reverse only so I guess the forward in the controller is gone and I assume that is what lead to the melt down of the F/R cam.
I spent several hrs cutting and replacing wires. I was hoping to have it running today but, Oh well I guess I did meet my goal because it will run in reverse! |
08-28-2019, 06:26 AM | #7 |
Not Yet Wild
Join Date: Aug 2019
Posts: 3
|
Re: Controller
JohnnieB I'm new to this I have a 99 ezgo txt 36v have voltage out of solenoid when I push the pedal have voltage at the a1 a2 cables on the motor when I push the pedal but the cart wont move...the solenoid just clicks
|
08-28-2019, 08:19 AM | #8 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Controller
Start a new thread. Johnnie won't see this but by accident and hijacking another persons thread like this is considered bad forum etiquette.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Is the Curtis 1311-1101 Controller Handset PMC a good controller | Electric EZGO | |||
Navitas TSX 440A Controller, Harness for Club Car IQ-up and Dash-Mount OTF Controller | Golf Carts and Parts | |||
RXV controller not responding to upgrade handheld device to program controller | Electric EZGO | |||
Plum Quick Bandit + 500 AMP Controller OR Executioner w/ Stock Controller | Electric Club Car | |||
Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05 | Electric EZGO |