lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 10-30-2019, 08:23 PM   #11
BobBoyce
Gone Insane
E-Z-GO
 
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
Default Re: RXV Curtis Controller date code decipher

Quote:
Originally Posted by relcead View Post
Can you be a little more specific why?
If the whole cart is present can the new one 2020 be programed like the 2019 model?
Nope, it is not the same...

The Vehicle Control Language (VCL) in the newest RXV controllers has been altered to prevent higher top speeds. They won't even do the Freedom mode speed of 19.5 MPH anymore without my help. Top speed is 15 MPH from the factory. I must reprogram it in a manner that will invalidate the warranty in order to speed it up. An option is to buy an older controller from eBay and save the new controller to reinstall if warranty service is needed. E-Z-GO dealers are having me reprogram them, just so they can be sold now. That has never been an issue before. E-Z-GO is driving the dealers to seek me out.

Bob
BobBoyce is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 10-31-2019, 04:57 AM   #12
relcead
Not Yet Wild
 
Join Date: Aug 2019
Posts: 68
Default Re: RXV Curtis Controller date code decipher

Ok thank you for your information. If someone would be able to merge 2019 speed parameters VCL in a 2020 .cpf and write it to a 2020 controller that would do the trick as well?
relcead is offline   Reply With Quote
Old 11-01-2019, 07:46 PM   #13
BobBoyce
Gone Insane
E-Z-GO
 
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
Default Re: RXV Curtis Controller date code decipher

Quote:
Originally Posted by relcead View Post
Ok thank you for your information. If someone would be able to merge 2019 speed parameters VCL in a 2020 .cpf and write it to a 2020 controller that would do the trick as well?
Absolutely not. In order to change any parameter outside of the acceptable VCL limits, writes must be made live to a controller. I cannot write the changes that I make by writing a saved file to a controller. If one wants to modify an OS/VCL that is written to a controller, you'll have to reflash the controller with a precompiled OS/VCL file that is compatible with that controller. These must be downloaded from Curtis, or selected from a library of saved OS/VCL files.
BobBoyce is offline   Reply With Quote
Old 11-01-2019, 08:56 PM   #14
relcead
Not Yet Wild
 
Join Date: Aug 2019
Posts: 68
Default Re: RXV Curtis Controller date code decipher

Thank you again. Is there a good way to download OS/VCL files from a Controller? It is a different file than the .cpf file?
relcead is offline   Reply With Quote
Old 11-01-2019, 11:39 PM   #15
BobBoyce
Gone Insane
E-Z-GO
 
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
Default Re: RXV Curtis Controller date code decipher

Quote:
Originally Posted by relcead View Post
Thank you again. Is there a good way to download OS/VCL files from a Controller? It is a different file than the .cpf file?
It requires an original Curtis 1309 interface with original Factory or Development level EEPROM content. Since the content of the EEPROM cannot be precisely duplicated (checksums must match precisely), you're forced to buy or lease an original from a source within Curtis. I had these when I was a Factory level
OEM. I have an account on the Curtis server for file access.

A tip... If you cannot install the 1314 software completely to full operation without editing the registry to get past the "not configured" error, it will not allow advanced operations.
BobBoyce is offline   Reply With Quote
Old 11-02-2019, 10:59 PM   #16
relcead
Not Yet Wild
 
Join Date: Aug 2019
Posts: 68
Default Re: RXV Curtis Controller date code decipher

Thank you Sir. Interesting.
relcead is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
date code decipher Test Post
Ezgo LSV Curtis SepEx controller , 1st code 24, now gone, only code 34 now. Electric EZGO
Curtis Controller '02 DS IQ w/speed code 4 Golf Carts and Parts
For Sale Stock Precedent IQ Curtis Controller (speed code 4)and Solenoid Golf Carts and Parts
curtis controller fault code Electric EZGO


All times are GMT -5. The time now is 02:24 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.