|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-08-2008, 03:38 PM | #1 |
Not Yet Wild
Join Date: Sep 2008
Posts: 33
|
Install question on Jakes Lift for G22
Has anyone installed the Jakes 6" Spindle Lift on a G22 with 22x10x11 tires with 3/5 offset wheels. If so did you have to trim the inside fenders to prevent any rubbing?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-08-2008, 03:46 PM | #2 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,826
|
Re: Install question on Jakes Lift for G22
I haven't installed a Jake's and I really doubt you will have to trim. But if you do, I would pull the rubber guard around the cowl (inside dash area) and trim the inside part and then pull toward the inside floor area and reattach. I did this on my G16 with a 4 inch lift when I installed 22's. Keeps from having to mess up the outside area of the fender well plus the rubber molding covers what you trimmed on the inside.
|
|
|
10-08-2008, 05:10 PM | #3 |
Gone Wild
Join Date: Jan 2008
Location: Covington, TN
Posts: 1,942
|
Re: Install question on Jakes Lift for G22
I drill a small hole at the bottom of the inner fender in the middle and zip tie it to the spring on the shock and it will pull the inner fender away from the tire.
|
10-08-2008, 05:49 PM | #4 |
Not Yet Wild
Join Date: Aug 2008
Posts: 24
|
Re: Install question on Jakes Lift for G22
I did what Craig did, too. They didn't rub all the time but it was annoying when it did happen.
good luck, gator. |
10-08-2008, 07:19 PM | #5 |
Not Yet Wild
Join Date: Sep 2008
Posts: 33
|
Re: Install question on Jakes Lift for G22
Did you guys use a 4 inch or 6 inch lift. My initial reaction is the 6 inch lift should be ok, but I was not sure.
|
10-08-2008, 07:48 PM | #6 |
Gone Wild
Join Date: Jan 2008
Location: Covington, TN
Posts: 1,942
|
Re: Install question on Jakes Lift for G22
I put a 6 in on a g-22 and have put 5" lifts on g-16's and have had to pull almost all inner fenders over to shock to keep from rubbing the tires.
|
10-09-2008, 09:55 PM | #7 |
Not Yet Wild
Join Date: Aug 2008
Posts: 24
|
Re: Install question on Jakes Lift for G22
I have a 6 inch on , and as I said, it rubs/flaps Sometimes.
good luck, gator |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G1 Jakes 6" Lift Kit what do I have to do ? | Gas Yamaha | |||
jakes lift | Gas Club Car | |||
Jakes lift add on? | Lifted Golf Carts | |||
g1 jakes lift kit | Gas Yamaha |