06-30-2008, 10:04 PM | #1 |
Not Yet Wild
Join Date: Jun 2008
Posts: 1
|
1998 g19
i have a g19 cart put new controller and motor new batts still does not run the wire off silanoid r/b is not hooked up need help thank
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-30-2008, 10:06 PM | #2 |
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: 1998 g19
Welcome to the forum jakesdad...........................
|
07-02-2008, 12:11 PM | #3 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: 1998 g19
It's common to have the small wire connections to the solenoid to get destroyed from battery acid. If you have to put "butt or snap connectors" from the harness to solenoid small terminals. You need both wires hooked up for the car to run. May I add...Please put the "run/tow" switch in tow when ever working with battery connections or wiring repairs. This will cut off power to the controller and in the event of a "spark" it will protect the controller from damage. Hope this takes care of your problem. Dave
|
Tags |
eltic probs |
|
|
Similar Threads | ||||
Thread | Forum | |||
NEED HELP! With 1998 ezgo with 295 robin | Gas EZGO | |||
1998 G16A engine | Gas Yamaha | |||
1998 Par Car | Gas Columbia ParCar | |||
1998 cc gas | Golf Carts and Parts | |||
1998 Gas | Gas Yamaha |