06' EZGO build- Air Ride, custom dash, Tv, and much more

[1sikcart]

Update:

-Started wiring switch panel
-Cut up dash for radio
-installed Harley Davidson ignition
-ran power and ground for auxiliary battery and compressor
-assembled the front suspension for final time
-installed motor
-cut polished column and installed steering wheel (looks amazing)
-cut holes in the body for speakers
-modified forward reverse bar to clear speakers
-removed lenses from ezgo headlights and installed blue ones
-swapped lenses on the taillights for clear ones
-installed new tie rod ends
-installed new rear wheel studs
-adjusted and cleaned up brakes
-rerouted brake cables

[Revolution]

Looking good.

What the heck is a "Bunny Burner"?

[Kerrville78028]

Yea... what is that switch on the far right intended for? Do I need one of those?

[Pitbull Joe]

Sweet! Man you've been hard at work.

[1sikcart]

Originally Posted by Revolution

Looking good.

What the heck is a "Bunny Burner"?

It was a blank space so I filled it with a switch that just lights up for my kids to turn on. I thought it got lost at work so I ordered another one without knowing it was already at the garage. Also figured out the driving lights is a non LED light so I ordered a new one of those. So I now have 2 extra!
If i ever decide to add something else I'll swap the bunnies burner out!

[1sikcart]

headlights and taillights done.

taillights were very easy took about ten minutes. the headlights were not so easy. after baking them in my pizza oven on 275' for 8 minutes they still did not want to seperate so i busted the glass out trying and used pliers to take out the remaining glass. then cleaned it out with a razor blade. If you want to do this you also have to dremel the inside of the headlight so the corners will sit flush. Overall i couldn't be happier with the results. One of my favorite mods to date.

[1sikcart]

Update:

-Ripped all the original seat covers off
-painted the bagwell cover and motor cover
-touched up the frame and rear ladder bars
-chopped the roof 3in front 2.5in rear
-worked on my brothers cart for a change building a custom push bar













absolutely LOVE how the roof turned out!! I was going to chop the rear seat bars like Mikey did but it seems i have a different rear seat. I would need to make custom brackets for the rear seatback to mount and not sure I want to go that route. Plus all my girls are still little so it might be best to leave it alone anyway. we'll see.....

[1sikcart]

just ordered a new steering intermediate shaft because mine is to short. also ordered a new hinge to chop the windshield and a coated chain to use a limiting strap for the front. Really hoping the money stops flying out the window soon!!!

[1sikcart]

Really sick of these huge pics can someone PM me and tell me how to resize them. can't find it anywhere on photobucket

Update:
-installed first set of LEDs under the cart
-installed new steering intermediate shaft
-cut out wood for new rear seat top and bottom mine was completely rotted fter only 2 years
-cut the dash holes and
-did some more wiring
-dropped the body off for paint
-put new covers on both front seats
-installed aux. battery tray and tie down
-removed my family's names off the windshield (vinyl)
-took windshield to get chopped









love how the dash is coming together really looking good!!!

[Kerrville78028]

Wow, that dash is nice!