|
01-12-2012, 01:47 PM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2011
Location: Ontario Canada
Posts: 40
|
Ezgo 300ex
New here just started my project. Starting with a EZGO electric and a 2003 honda 300ex. I will add photos as I get things done.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
01-12-2012, 02:05 PM
|
#2 |
|
Gone Wild
Join Date: Jul 2009
Location: Liberty Lake, WA.
Posts: 1,762
|
Re: Ezgo 300ex
Cool build. Lots of guys doing this kind of thing successfully. Should be a fun ride.
|
|
|
|
|
01-12-2012, 06:42 PM
|
#3 |
|
Not Yet Wild
Join Date: Aug 2010
Posts: 46
|
Re: Ezgo 300ex
Looks great!!! If you have not checked my build out, I put one in a club car. Very fun to drive. I'll be checking out your progress to see how you are doing things so post as many pics as you can.
|
|
|
|
|
01-12-2012, 07:31 PM
|
#4 |
|
The Fabricator
Join Date: Dec 2006
Posts: 2,016
|
Re: Ezgo 300ex
Looks real good.
 How wide does the rear measure to the outside of the tires? |
|
|
|
|
01-12-2012, 07:43 PM
|
#5 |
|
Let's go racin' boyz!!
 Join Date: Oct 2010
Location: Springdale, AR
Posts: 4,156
|
Re: Ezgo 300ex
Cool!!! I'll be watching for more updates.
|
|
|
|
|
01-16-2012, 11:50 AM
|
#6 |
|
Not Yet Wild
Join Date: Dec 2011
Location: Ontario Canada
Posts: 40
|
Re: Ezgo 300ex
I have 2.5" wheel spacers in the back and 1.5 for the front .. lets just hope I don't bend an axle lol... and chevytruck I was on ur thread talken to u already about your build.
|
|
|
|
|
01-20-2012, 11:01 AM
|
#7 |
|
Not Yet Wild
Join Date: Dec 2011
Location: Ontario Canada
Posts: 40
|
Re: Ezgo 300ex
Some more pics of build ..there will be a total of four mounts i only have pics of three right now. will upload more later..
|
|
|
|
|
01-20-2012, 12:08 PM
|
#8 |
|
Gone Wild
Join Date: May 2011
Location: Live Oak, FL.
Posts: 263
|
Re: Ezgo 300ex
Very cool are you gona use the from a arms on it too?
|
|
|
|
|
01-21-2012, 10:11 AM
|
#9 |
|
Not Yet Wild
Join Date: Dec 2011
Location: Ontario Canada
Posts: 40
|
Re: Ezgo 300ex
ya here are some pics its not welded in just clamped in. also some pics of the mock up with body
|
|
|
|
|
01-30-2012, 11:29 AM
|
#10 |
|
Not Yet Wild
Join Date: Dec 2011
Location: Ontario Canada
Posts: 40
|
Re: Ezgo 300ex
front end welded in and steering in and working. Something I found don't know if anyone else has done this but the original steering had a pivot arm and its to big to put in and if you use just the rack arm it would steer left when you turn right. What I found out is that I flipped the rack upside down removed the pivot arm and took out the shaft from one end and put it in the other end, now when I turn left it turns left... very cool and made the steering very easy to do...pics are attached
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Honda 300ex + 05 CC DS Project | Lifted Golf Carts | |||
| 300ex cc | Bike & ATV Engine Swaps | |||
| Marathon and the Honda 300ex setup | Lifted Golf Carts | |||
Linear Mode
