|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-15-2022, 05:51 PM | #1 |
Not Yet Wild
Join Date: Dec 2021
Posts: 7
|
SR48600/SW202 F/R install - no reverse
I just installed my SR controller and the SW202 F/R switch.
Two issues that I cannot figure out. No reverse. when I press the pedal, the solenoid clicks, but it doesn't move and the fan on the controller turns on. Also notice that my pack voltage was 40V, but w/in an hour it bled down to 38.6. Any ideas on these two issues? Any advice would be much appreciated. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax SR48600 Reverse options | Electric Club Car | |||
2008 -48v conversion - SR48500 and sw202 install | Electric EZGO | |||
SW202 install using stock controller | Electric EZGO | |||
2006 EZGO TXT MZJ400 and SW202 Install | Electric EZGO | |||
SW202 Install and now won't move | Electric Club Car |