1998 Carryall VI Transaxle Rebuild, Any Help??

[Ant-Knee]

Originally Posted by Fairtax4me

Looks good, glad to hear it all went back together well.
Thanks for the detailed post!

I also envy the cleanliness of that engine bay!

Didnt go as good as I thought.... Cart starts and idles fine... Idles perfect. will run for hours at idle.. Adjusted governor.. went to go for a ride,
But when I go to give it some throttle it does not rev up past idle.. I can floor the pedal and does not go above idle at all... Whats going on here?? Going through some things trying to figure this out... When I hit the gas the carb throttle is moving...all new cables.. I am wondering if it has anything to do with the rev limiter as this new motor was manufactured in 2013 the rev limiter came off my old motor which was a 98..

I am going to start another thread for this issue...


Thanks,

Ant....

[Ant-Knee]

Here is a video...

https://www.youtube.com/watch?v=kKuPqhjxIq8

I am thinking maybe the rev limiter, But not sure yet...
Any thoughts guys...

Thanks,

Ant...

[TahoeDawgZ71]

The engine isn't running. It's simply turning over with the starter. If you'll check the spark plug with a spark tester you'll probably see that it isn't firing.

2013 was around the time they introduced the 50 state engine that doesn't use a rev limiter. It has a rev limiter built into the ignition coil. Take the valve cover off and send me a picture of the valves. If they're adjustable, it's a 50 state engine. If they're non adjustable, it's a hydraulic lifter engine and can use a rev limiter. Irrelevant to your issue I know, but it's a form of identification.

[Ant-Knee]

Originally Posted by TahoeDawgZ71

The engine isn't running. It's simply turning over with the starter. If you'll check the spark plug with a spark tester you'll probably see that it isn't firing.

2013 was around the time they introduced the 50 state engine that doesn't use a rev limiter. It has a rev limiter built into the ignition coil. Take the valve cover off and send me a picture of the valves. If they're adjustable, it's a 50 state engine. If they're non adjustable, it's a hydraulic lifter engine and can use a rev limiter. Irrelevant to your issue I know, but it's a form of identification.

As soon as I removed the rev limiter she started right up... Running good now...
Haven't had a chance to really test her good yet cause its been raining here...

Thanks,

Ant...

[rib33024]

Good job on the cart Ant-Knee

[Ant-Knee]

Originally Posted by rib33024

Good job on the cart Ant-Knee

Thanks buddy, Its like I got a new cart.... Can't believe the difference.. Much better then expected... Got to adjust governor little tighter, Wanna set it for 19Mph at like 14 now.... Have a few other kinks to work out with the cart but it's getting there...


Thanks again,

Ant...

[TahoeDawgZ71]

Good job! Glad I could help.

[chipripper]

so glad you posted all these pics makes me less nervous pulling mine apart.

[Ant-Knee]

Originally Posted by chipripper

so glad you posted all these pics makes me less nervous pulling mine apart.

Not hard to do at all...

I have to pull mine apart again tho... I need to replace my syncros... If you have it apart I suggest changing syncros... My forward is fine but still having problems with reverse... It will not fully come out of reverse due to not changing syncros... I tried to save a couple bucks cause they didnt really look that bad but they need changing... I will pull it apart again maybe next weekend...


Thanks,

Ant...

[KStaats]

Originally Posted by Ant-Knee

Not hard to do at all...

I have to pull mine apart again tho... I need to replace my syncros... If you have it apart I suggest changing syncros... My forward is fine but still having problems with reverse... It will not fully come out of reverse due to not changing syncros... I tried to save a couple bucks cause they didnt really look that bad but they need changing... I will pull it apart again maybe next weekend...


Thanks,

Ant...

Ant-Knee

I dont live far from Davie at all. You wouldnt have any interest in working with me to help me do the same thing you did would ya? I could pay you for your time.